AutoCodes – Buick – B3060 Buick

B3060 Buick Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 Buick indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,166

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 Buick Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 Buick - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 Buick Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 Buick?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 Buick code?

Need more information on how to fix the B3060 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 Buick Code

1. What are the common symptoms of OBDII code B3060 in a Buick?

- Common symptoms include difficulty starting the vehicle, intermittent stalling, and issues with the vehicle's immobilizer system.

2. What does the OBDII code B3060 Buick indicate?

- The code B3060 indicates an Unprogrammed Transponder Identification Code Received Malfunction, usually related to the vehicle's key or immobilizer system.

3. What are the potential causes of the B3060 code in a Buick?

- Causes can include a faulty transponder key, issues with the immobilizer system, a damaged transceiver, or a communication error between the key and the vehicle's computer.

4. How can I diagnose the B3060 code in my Buick?

- Diagnosing the code may involve checking the transponder key's functionality, inspecting the immobilizer system, and using a diagnostic scanner to communicate with the vehicle's computer.

5. Can I still drive my Buick with the B3060 code present?

- It's not recommended to drive the vehicle with the B3060 code present, as it may lead to starting issues or potential immobilization of the vehicle.

6. How can I repair the B3060 code in my Buick?

- Repairing the B3060 code may involve reprogramming the transponder key, replacing a faulty key or transceiver, or addressing any issues with the immobilizer system.

7. Is it possible to reset the B3060 code without professional help?

- While some codes can be cleared with a simple reset, the B3060 code usually requires specialized equipment and knowledge to diagnose and repair properly.

8. Can a DIY enthusiast fix the B3060 code in a Buick?

- Depending on the skill level and tools available, some DIY enthusiasts may be able to address simpler causes of the B3060 code, such as replacing a faulty key. However, more complex issues may require professional assistance.

9. Will the B3060 code reset itself after repairs are made?

- After repairs are made to address the underlying cause of the B3060 code, it may be necessary to clear the code using a diagnostic scanner to reset the system and ensure the issue is resolved.

10. How can I prevent the B3060 code from occurring in my Buick?

- To prevent the B3060 code, it's essential to take care of the transponder key, avoid damage to the key or transceiver, and address any warning signs promptly to maintain the vehicle's immobilizer system's functionality.