AutoCodes – Chevrolet – B3060 2018 Chevrolet Silverado

B3060 2018 Chevrolet Silverado Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 2018 Chevrolet Silverado indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 261

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 2018 Chevrolet Silverado Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 2018 Chevrolet Silverado - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 2018 Chevrolet Silverado Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 2018 Chevrolet Silverado?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 2018 Chevrolet Silverado code?

Need more information on how to fix the B3060 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 2018 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code B3060 in a 2018 Chevrolet Silverado?

The common symptoms of code B3060 include issues with starting the vehicle, intermittent stalling, or the engine not turning over.

2. What does the OBDII code B3060 indicate in a 2018 Chevrolet Silverado?

Code B3060 indicates an Unprogrammed Transponder Identification Code Received Malfunction in the vehicle's immobilizer system.

3. What are the possible causes of code B3060 in a 2018 Chevrolet Silverado?

Possible causes of code B3060 include a faulty transponder key, issues with the immobilizer system, or a problem with the vehicle's security system.

4. How can I diagnose OBDII code B3060 in my 2018 Chevrolet Silverado?

Diagnosing code B3060 typically involves checking the transponder key, inspecting the immobilizer system components, and using a diagnostic scanner to retrieve specific fault codes.

5. Can I repair OBDII code B3060 in my 2018 Chevrolet Silverado myself?

Repairing code B3060 may require reprogramming a new transponder key, resetting the immobilizer system, or addressing any underlying security system issues. It is recommended to consult a professional for proper diagnosis and repair.

6. Is it safe to continue driving my 2018 Chevrolet Silverado with OBDII code B3060 present?

It is not recommended to drive the vehicle with code B3060 present, as it may result in starting or stalling issues. Addressing the underlying cause promptly is essential to ensure the vehicle's proper functionality.

7. How much does it typically cost to fix OBDII code B3060 in a 2018 Chevrolet Silverado?

The cost of fixing code B3060 can vary depending on the exact cause of the issue. Expenses may include replacing the transponder key, reprogramming the immobilizer system, or addressing any security system faults.

8. Can a malfunctioning battery cause OBDII code B3060 to appear in a 2018 Chevrolet Silverado?

A weak or malfunctioning battery can potentially trigger code B3060 due to insufficient power supply to the immobilizer system. It is advisable to ensure the battery is in good condition before diagnosing the issue further.

9. Will disconnecting the battery reset OBDII code B3060 in my 2018 Chevrolet Silverado?

Disconnecting the battery may temporarily clear the code, but it is unlikely to resolve the underlying issue causing code B3060. It is best to diagnose the problem accurately and address it accordingly.

10. How long does it take to repair OBDII code B3060 in a 2018 Chevrolet Silverado?

The repair time for code B3060 can vary depending on the complexity of the issue and the necessary repairs. It is recommended to consult a professional technician for an accurate assessment of the repair timeline.