AutoCodes – Chevrolet – B3060 2014 Chevrolet Silverado

B3060 2014 Chevrolet Silverado Code - Unprogrammed Transponder Identification Code Received Malfunction

Quick Answer

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. Common causes include Faulty Key, Faulty Immobilizer Control Module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B3060 2014 Chevrolet Silverado indicates Unprogrammed Transponder Identification Code Received Malfunction.
Common causes: Common causes include Faulty Key, Faulty Immobilizer Control Module.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 269

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B3060 2014 Chevrolet Silverado Description

When an ignition key is inserted into the key pocket/slot and the ignition mode switch is pressed, the transponder embedded in the key is energized by the immobilizer antenna exciter coil. The transponder transmits a signal to the immobilizer control module. The immobilizer control module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the transponder value measured by the BCM is incorrect or not learned to the vehicle.

OBDII Code B3060 2014 Chevrolet Silverado - Unprogrammed Transponder Identification Code Received Malfunction - AutoCodes.com — B3060 2014 Chevrolet Silverado Code - Unprogrammed Transponder Identification Code Received Malfunction

What does this mean?

What are the Possible Causes of the DTC B3060 2014 Chevrolet Silverado?

Faulty Key
Faulty Immobilizer Control Module

How to Fix the DTC B3060 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B3060 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B3060 2014 Chevrolet Silverado code?

Need more information on how to fix the B3060 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B3060 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B3060 2014 Chevrolet Silverado Code

1. What does OBDII code B3060 mean for a 2014 Chevrolet Silverado?

B3060 indicates that the vehicle's security system has detected an unprogrammed transponder key or an issue with key recognition.

2. What are the common symptoms of code B3060 in a 2014 Silverado?

Symptoms include difficulty starting the vehicle, the security light illuminating on the dashboard, or the engine failing to crank.

3. What causes code B3060 in a Chevrolet Silverado?

The code is typically triggered by using an unprogrammed or incorrect key, a malfunctioning transponder in the key, or issues with the vehicle's theft deterrent system.

4. How can I fix code B3060 on my 2014 Silverado?

Reprogram the key using a compatible diagnostic tool or replace the transponder key if it is damaged. If the issue persists, have the theft deterrent system inspected by a professional.

5. Can I clear code B3060 without fixing the problem?

Clearing the code without addressing the underlying issue will likely result in the code reappearing and continued starting issues.

6. Do I need a professional to fix code B3060 on my Silverado?

If you have the necessary tools to reprogram the key, you may be able to fix it yourself. However, a professional mechanic or dealership may be required for theft deterrent system repairs.

7. How can I prevent code B3060 from occurring?

Always use a properly programmed transponder key for your vehicle and avoid tampering with the theft deterrent system.

8. What tools are needed to fix code B3060 on a 2014 Silverado?

You may need a compatible OBDII scanner with key programming capabilities or access to dealership-level equipment.

9. Can a dead key fob battery cause code B3060?

No, a dead battery in the key fob will not trigger this code, but it may prevent the vehicle from recognizing the key.

10. How much does it cost to fix code B3060 on a Chevrolet Silverado?

The cost can vary depending on whether you need a new key or repairs to the theft deterrent system. Reprogramming a key typically costs $50-$150, while system repairs may be more expensive.