B2A26 Mercury Code - Keypad Switch Circuit Failure
Quick Answer
The Smart Junction Box (SJB) monitors for a ground signal on the keyless entry keypad signal input circuits. Common causes include Faulty Keyless Entry Keypad, Keyless Entry Keypad harness is open or shorted, Keyless Entry Keypad circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2A26 Mercury indicates Keypad Switch Circuit Failure.
- Common causes
- Common causes include Faulty Keyless Entry Keypad, Keyless Entry Keypad harness is open or shorted, Keyless Entry Keypad circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2A26 Mercury Description
To unlock all the doors, the 3/4 button must be pressed within 5 seconds of the 5-digit code being entered.
To release the liftgate window, the 5/6 button must be pressed within 5 seconds of the 5-digit code being entered.
To lock all the doors, the 5-digit code does not need to be entered. Press the 7/8 and 9/0 buttons at the same time.
The Diagnostic Trouble Code (DTC) sets when the SJB detects a short to ground on any of the keypad input circuits. This DTC may also set if any of the keypad buttons are pressed for longer than 2 minutes.
What are the Possible Causes of the DTC B2A26 Mercury?
- Faulty Keyless Entry Keypad
- Keyless Entry Keypad harness is open or shorted
- Keyless Entry Keypad circuit poor electrical connection
- Faulty Smart Junction Box (SJB)
How to Fix the DTC B2A26 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2A26 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2A26 Mercury code?
Need more information on how to fix the B2A26 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2A26 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2A26 Mercury Code
1. What does the OBDII code B2A26 mean on a Mercury vehicle?
The code B2A26 indicates a Keypad Switch Circuit Failure, meaning there’s an issue with the electronic entry keypad on the driver’s door.
2. What are the common symptoms of code B2A26?
Symptoms include the keypad not responding to input, inability to unlock the doors using the keypad, or intermittent functionality.
3. What causes the B2A26 code to appear?
Common causes include a damaged keypad, a faulty wiring connection, corrosion in the circuit, or a malfunctioning body control module (BCM).
4. Can I still use my Mercury vehicle if the B2A26 code is present?
Yes, the vehicle is still drivable, but you may not be able to use the keypad for locking or unlocking the doors.
5. How do I diagnose the B2A26 code on my Mercury?
Start by inspecting the keypad for physical damage, checking the wiring and connectors for corrosion or disconnection, and scanning for additional codes using an OBDII scanner.
6. How can I fix the B2A26 code on my Mercury?
Repairs may include replacing the keypad, repairing or reconnecting damaged wiring, or reprogramming the body control module.
7. How much does it cost to repair a B2A26 code?
Repair costs vary but typically range from $100 to $300, depending on whether the keypad or wiring needs replacement.
8. Is the B2A26 code specific to Mercury vehicles?
While the code can appear on other Ford vehicles, it is commonly associated with Mercury models equipped with keyless entry keypads.
9. Will clearing the B2A26 code fix the problem?
Clearing the code may temporarily remove it, but the underlying issue must be addressed to prevent it from returning.
10. Can weather conditions cause a B2A26 code?
Yes, exposure to moisture or extreme temperatures can damage the keypad or corrode its wiring, leading to this code.
Discuss the causes and fixes for B2A26 Mercury OBDII Code
Code B2A26 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
