AutoCodes – Subaru – B2A0C Subaru

B2A0C Subaru Code - DCM Internal Fault

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the Data Communication Module (DCM) is not to factory specifications. Common causes include Faulty Data Communication Module (DCM), Data Communication Module harness is open or shorted, Data Communication Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2A0C Subaru indicates DCM Internal Fault.
Common causes: Common causes include Faulty Data Communication Module (DCM), Data Communication Module harness is open or shorted, Data Communication Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,129

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 27, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2A0C Subaru Description

The Diagnostic Trouble Code (DTC) sets when the Data Communication Module (DCM) is not to factory specifications.

OBDII Code B2A0C Subaru - DCM Internal Fault - AutoCodes.com — B2A0C Subaru Code - DCM Internal Fault

What does this mean?

What are the Possible Causes of the DTC B2A0C Subaru?

Faulty Data Communication Module (DCM)
Data Communication Module harness is open or shorted
Data Communication Module circuit poor electrical connection

How to Fix the DTC B2A0C Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2A0C Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2A0C Subaru code?

Need more information on how to fix the B2A0C Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2A0C Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2A0C Subaru Code

1. What are the common symptoms of OBDII code B2A0C Subaru DCM Internal Fault?

- Common symptoms include issues with the vehicle's communication system, such as loss of connection with the diagnostic communication module.

2. What causes the OBDII code B2A0C Subaru DCM Internal Fault?

- This code is typically caused by internal faults within the diagnostic communication module itself.

3. How can I diagnose the OBDII code B2A0C Subaru DCM Internal Fault?

- Diagnosis usually involves using a professional OBDII scanner to read the specific fault code and investigate the communication system components.

4. Is it safe to continue driving with the OBDII code B2A0C Subaru DCM Internal Fault?

- It is generally not recommended to continue driving with this fault, as it may lead to further communication issues and potential safety concerns.

5. Can I reset the OBDII code B2A0C Subaru DCM Internal Fault on my own?

- While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the fault to prevent it from recurring.

6. How do I repair the OBDII code B2A0C Subaru DCM Internal Fault?

- Repairing this fault often involves replacing or repairing the diagnostic communication module to resolve the internal fault.

7. Are there any DIY tips for troubleshooting the OBDII code B2A0C Subaru DCM Internal Fault?

- DIY troubleshooting tips may include checking for loose connections, inspecting wiring harnesses, and ensuring all communication system components are properly connected.

8. How much does it cost to repair the OBDII code B2A0C Subaru DCM Internal Fault?

- Repair costs can vary depending on the extent of the internal fault and whether the diagnostic communication module needs to be replaced. It is recommended to consult a professional for an accurate estimate.

9. Can a faulty battery cause the OBDII code B2A0C Subaru DCM Internal Fault?

- While a faulty battery may contribute to communication issues in a vehicle, the specific internal fault associated with this code is typically related to the diagnostic communication module itself.

10. Is the OBDII code B2A0C Subaru DCM Internal Fault a common issue in Subaru vehicles?

- While not extremely common, some Subaru vehicles may experience this internal fault within the diagnostic communication module, leading to the appearance of this OBDII code.