B298B Lincoln Code - Mode Door Actuator Drive Circuit Shorted To Ground
Quick Answer
Under normal operation, to rotate the mode door actuator clockwise, the Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC) module supplies voltage and ground to the floor/defrost/panel mode door actuator motor through the circuit. Common causes include Stuck or damaged linkage or door, Faulty Mode Door Actuator, Mode Door Actuator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B298B Lincoln indicates Mode Door Actuator Drive Circuit Shorted To Ground.
- Common causes
- Common causes include Stuck or damaged linkage or door, Faulty Mode Door Actuator, Mode Door Actuator harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B298B Lincoln Description
The mode door actuator feedback resistor is supplied a ground from the EMTC module or EATC module and a 5-volt reference voltage. The EMTC module or EATC module reads the voltage on the mode door actuator feedback circuit to determine the mode door actuator position by the position of the actuator feedback resistor wiper arm.
What are the Possible Causes of the DTC B298B Lincoln?
- Stuck or damaged linkage or door
- Faulty Mode Door Actuator
- Mode Door Actuator harness is open or shorted
- Mode Door Actuator circuit poor electrical connection
- Electronic Manual Temperature Control (EMTC) Module
- Electronic Automatic Temperature Control (EATC) Module
How to Fix the DTC B298B Lincoln?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B298B Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B298B Lincoln code?
Need more information on how to fix the B298B Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B298B Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B298B Lincoln Code
1. What does the OBDII code B298B mean on a Lincoln?
B298B indicates that the mode door actuator drive circuit has a short to ground, which affects the HVAC system's ability to control airflow direction.
2. What are the symptoms of the B298B code on a Lincoln?
Common symptoms include improper or no airflow direction control, unusual noises from the HVAC system, and a check engine or HVAC system warning light.
3. What causes the B298B code to appear?
This code is typically caused by a short to ground in the mode door actuator circuit, damaged wiring, a faulty mode door actuator, or a malfunctioning HVAC control module.
4. How can I diagnose the B298B code on my Lincoln?
Diagnose by inspecting the mode door actuator wiring for damage, checking for short circuits, testing the actuator for proper operation, and using a multimeter to verify electrical continuity.
5. Can I drive my Lincoln with a B298B code?
Yes, you can drive the vehicle, but the HVAC system may not function correctly, affecting cabin comfort and airflow control.
6. How do I fix the B298B code on a Lincoln?
Repairs may include replacing the mode door actuator, repairing or replacing damaged wiring, clearing the short to ground, or reprogramming or replacing the HVAC control module.
7. How much does it cost to fix the B298B code?
The repair cost can vary depending on the cause but typically ranges from $150 to $400, including parts and labor.
8. Can a faulty HVAC control module cause the B298B code?
Yes, a malfunctioning HVAC control module can send incorrect signals to the mode door actuator, triggering the code.
9. What tools are needed to troubleshoot the B298B code?
You'll need a diagnostic scan tool, a multimeter, and possibly wiring diagrams for your Lincoln's HVAC system.
10. Can clearing the B298B code fix the issue?
Clearing the code will not fix the underlying problem. You must address the cause of the short to ground to prevent the code from returning.
Discuss the causes and fixes for B298B Lincoln OBDII Code
Code B298B Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
