B298A Lincoln Code - Mode Door Actuator Drive Circuit Open
Quick Answer
Under normal operation, to rotate the mode door actuator clockwise, the Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC) module supplies voltage and ground to the floor/defrost/panel mode door actuator motor through the circuit. Common causes include Stuck or damaged linkage or door, Faulty Mode Door Actuator, Mode Door Actuator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B298A Lincoln indicates Mode Door Actuator Drive Circuit Open.
- Common causes
- Common causes include Stuck or damaged linkage or door, Faulty Mode Door Actuator, Mode Door Actuator harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B298A Lincoln Description
The mode door actuator feedback resistor is supplied a ground from the EMTC module or EATC module and a 5-volt reference voltage. The EMTC module or EATC module reads the voltage on the mode door actuator feedback circuit to determine the mode door actuator position by the position of the actuator feedback resistor wiper arm.
What are the Possible Causes of the DTC B298A Lincoln?
- Stuck or damaged linkage or door
- Faulty Mode Door Actuator
- Mode Door Actuator harness is open or shorted
- Mode Door Actuator circuit poor electrical connection
- Electronic Manual Temperature Control (EMTC) Module
- Electronic Automatic Temperature Control (EATC) Module
How to Fix the DTC B298A Lincoln?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B298A Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B298A Lincoln code?
Need more information on how to fix the B298A Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B298A Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B298A Lincoln Code
1. What does the OBDII code B298A mean on a Lincoln?
The code B298A indicates an issue with the mode door actuator drive circuit, specifically an open circuit preventing proper operation of the HVAC mode door.
2. What are the symptoms of the B298A code in a Lincoln?
Common symptoms include improper airflow direction from vents, inability to switch between defrost, floor, or face vents, and unusual noises from behind the dashboard.
3. What causes the B298A code to appear?
The code can be caused by a faulty mode door actuator, damaged wiring or connectors in the actuator circuit, or a malfunctioning HVAC control module.
4. How do you diagnose the B298A code?
Diagnosis involves inspecting the mode door actuator, checking for open or damaged wiring, testing the actuator for proper operation, and using a scan tool to verify the fault.
5. Can I drive my Lincoln with the B298A code active?
Yes, the vehicle is usually drivable, but you may experience discomfort due to limited HVAC functionality or improper airflow direction.
6. How is the B298A code fixed?
Repairs typically include replacing the mode door actuator, repairing damaged wiring or connectors, and clearing the code with a scan tool after resolving the issue.
7. How much does it cost to fix the B298A code in a Lincoln?
The repair cost varies but typically ranges from $150 to $400, depending on whether the actuator or wiring requires replacement.
8. Can I reset the B298A code without fixing the issue?
You can clear the code with a scan tool, but it will likely return if the underlying problem isn’t resolved.
9. What tools are needed to repair a B298A code?
Essential tools include a scan tool, a multimeter for testing electrical circuits, and basic hand tools for accessing and replacing the mode door actuator.
10. How long does it take to fix the B298A code?
Repair time can range from 1 to 3 hours, depending on the complexity of accessing the mode door actuator and diagnosing the issue.
Discuss the causes and fixes for B298A Lincoln OBDII Code
Code B298A Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
