B297F Mercury Code - Passenger Blend Door Actuator Drive Circuit Shorted To Ground
Quick Answer
Under normal operation, to rotate the blend door actuator clockwise, the Electronic Manual Temperature Control (EMTC) Module or Electronic Automatic Temperature Control (EATC) Module supplies voltage to the blend door actuator motors through the door actuator feed A circuits and supplies ground through the door actuator feed B circuits. Common causes include Stuck or damaged linkage or door, Faulty Blend Door Actuator, Blend Door Actuator harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B297F Mercury indicates Passenger Blend Door Actuator Drive Circuit Shorted To Ground.
- Common causes
- Common causes include Stuck or damaged linkage or door, Faulty Blend Door Actuator, Blend Door Actuator harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B297F Mercury Description
The blend door actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the blend door actuator return circuits and a 5-volt reference voltage on the blend door actuator reference circuits. The EMTC module or EATC module reads the voltage on the blend door actuator feedback circuits to determine the blend door actuator position by the position of the actuator feedback resistor wiper arm.
What are the Possible Causes of the DTC B297F Mercury?
- Stuck or damaged linkage or door
- Faulty Blend Door Actuator
- Blend Door Actuator harness is open or shorted
- Blend Door Actuator circuit poor electrical connection
- Electronic Manual Temperature Control (EMTC) Module
- Electronic Automatic Temperature Control (EATC) Module
How to Fix the DTC B297F Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B297F Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B297F Mercury code?
Need more information on how to fix the B297F Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B297F Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B297F Mercury Code
1. What does the OBDII code B297F mean on a Mercury vehicle?
The B297F code indicates that the passenger blend door actuator drive circuit is shorted to ground, preventing proper control of the HVAC system's airflow or temperature.
2. What are the symptoms of code B297F in a Mercury vehicle?
Symptoms include inconsistent cabin temperature, inability to adjust the passenger-side climate controls, unusual clicking noises from the dashboard, or the HVAC system not functioning correctly.
3. What causes the B297F code to appear in a Mercury?
Common causes include a shorted or damaged blend door actuator, faulty wiring or connectors in the actuator circuit, or an issue with the HVAC control module.
4. Can I drive with the B297F code active on my Mercury?
Yes, you can drive with this code active, but you may experience discomfort due to improper temperature control inside the vehicle.
5. How do I diagnose the B297F code on a Mercury?
Start by visually inspecting the wiring and connectors for damage, test the blend door actuator for proper operation, and use a multimeter to check for shorts to ground in the actuator circuit.
6. How do I fix the B297F code on a Mercury vehicle?
Repairs may include replacing the blend door actuator, repairing or replacing damaged wiring, or addressing issues with the HVAC control module.
7. What tools are needed to repair the B297F code?
You may need a multimeter, a scan tool capable of reading HVAC system codes, and basic hand tools for accessing and replacing the blend door actuator.
8. How much does it cost to fix the B297F code?
Repair costs vary depending on the issue, but replacing a blend door actuator typically costs $100–$300, including parts and labor.
9. Can I clear the B297F code without fixing the problem?
Clearing the code without addressing the issue may provide temporary relief, but the code will likely return until the underlying problem is resolved.
10. Is the B297F code specific to Mercury vehicles?
No, while this code is common on Mercury vehicles, other manufacturers may also use it to indicate a similar HVAC system issue. Always consult your vehicle’s service manual for specifics.
Discuss the causes and fixes for B297F Mercury OBDII Code
Code B297F Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
