B2960 Buick Code - Security System Sensor Data Incorrect But Valid
Quick Answer
The Passlock™ system is provided in order to prevent vehicle theft if the ignition lock cylinder is forced to rotate or the ignition switch is operated while separated from the ignition lock cylinder case. Common causes include Faulty Security System Sensor, Security System Sensor harness is open or shorted, Security System Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2960 Buick indicates Security System Sensor Data Incorrect But Valid.
- Common causes
- Common causes include Faulty Security System Sensor, Security System Sensor harness is open or shorted, Security System Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2960 Buick Description
When the correct key is used to start the vehicle, a magnet on the lock cylinder passes close to the Passlock™ sensor within the ignition lock cylinder case. The magnet activates the security hall effect sensor in the Passlock™ sensor which completes a circuit from the security sensor signal circuit through a resistor to the security sensor low reference circuit. The resistance value will vary from vehicle to vehicle. The BCM will measure the voltage on the security sensor signal circuit and compare this voltage to a previously learned voltage. If the voltage measured is within the valid range, the BCM will send a class 2 message to the Powertrain Control Module (PCM) to enable vehicle starting. If the voltage measured is not within the valid range, a class 2 message will be sent to the PCM to disable starting of the vehicle.
What are the Possible Causes of the DTC B2960 Buick?
- Faulty Security System Sensor
- Security System Sensor harness is open or shorted
- Security System Sensor circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2960 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2960 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2960 Buick code?
Need more information on how to fix the B2960 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2960 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2960 Buick Code
1. What are the common symptoms of OBDII code B2960 in a Buick related to the security system sensor data?
- Common symptoms include the security light staying illuminated, the vehicle not starting, or intermittent starting issues.
2. What could cause the OBDII code B2960 in a Buick indicating "Security System Sensor Data Incorrect But Valid"?
- This code is often triggered by a fault in the key fob, the ignition switch, or the vehicle's immobilizer system.
3. How serious is the OBDII code B2960 in a Buick?
- While the vehicle may still be drivable with this code, it is recommended to address the issue promptly to avoid potential starting or security system malfunctions.
4. Can a DIY enthusiast repair the OBDII code B2960 in a Buick?
- Depending on the root cause, DIY repairs may be possible. However, some cases may require advanced diagnostic tools and expertise to accurately diagnose and fix the issue.
5. What are some repair tips for addressing the OBDII code B2960 in a Buick?
- Start by checking the key fob battery, ensuring it is not depleted. Next, inspect the ignition switch for any visible damage or wear. If the issue persists, consider seeking professional assistance.
6. How can a mechanic diagnose the OBDII code B2960 in a Buick?
- A mechanic would typically use an OBDII scanner to retrieve the code and then proceed with further diagnostics to pinpoint the exact cause, which may involve testing the key fob, ignition switch, and immobilizer system.
7. Is it safe to continue driving with the OBDII code B2960 present in a Buick?
- While the vehicle may still be operable, it is advisable to address the issue promptly to prevent potential starting or security system complications while driving.
8. Can resetting the OBDII code B2960 in a Buick temporarily resolve the issue?
- Resetting the code may temporarily clear the warning light, but if the underlying problem persists, the code is likely to reappear. It's essential to diagnose and address the root cause of the issue.
9. Are there any recalls or technical service bulletins related to the OBDII code B2960 in Buick vehicles?
- It's recommended to check with the manufacturer or authorized service centers for any relevant recalls or technical service bulletins related to this specific OBDII code in Buick vehicles.
10. How much can one expect to pay for repairing the OBDII code B2960 in a Buick at a dealership or repair shop?
- Repair costs can vary depending on the exact cause of the issue and the labor rates of the service provider. It's advisable to obtain multiple quotes and compare them before proceeding with the repair.
Discuss the causes and fixes for B2960 Buick OBDII Code
Code B2960 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
