B295E Mercury Code - Mode Door Potentiometer Feedback Circuit Open
Quick Answer
Under normal operation, to rotate the blend door actuator, the Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC) module supplies voltage to the actuator motors through the door actuator clockwise circuits, and supplies ground through the door actuator counterclockwise circuits. Common causes include Faulty Mode Door Actuator, Mode Door Actuator harness is open or shorted, Mode Door Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B295E Mercury indicates Mode Door Potentiometer Feedback Circuit Open.
- Common causes
- Common causes include Faulty Mode Door Actuator, Mode Door Actuator harness is open or shorted, Mode Door Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B295E Mercury Description
The actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the door actuator return circuits and a 5-volt reference voltage on the door actuator reference circuits. The EMTC module or EATC module reads the voltage on the blend door actuator feedback circuits to determine the door actuator position, by the position of the actuator feedback resistor wiper arm.
What are the Possible Causes of the DTC B295E Mercury?
- Faulty Mode Door Actuator
- Mode Door Actuator harness is open or shorted
- Mode Door Actuator circuit poor electrical connection
- Faulty Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC)
How to Fix the DTC B295E Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B295E Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B295E Mercury code?
Need more information on how to fix the B295E Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B295E Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B295E Mercury Code
1. What does the OBDII code B295E mean on a Mercury?
The B295E code indicates an issue with the Mode Door Potentiometer Feedback Circuit, specifically an open circuit, which prevents the HVAC system from properly controlling airflow direction.
2. What are the symptoms of code B295E in a Mercury vehicle?
Common symptoms include improper airflow direction from the vents, inability to switch modes (e.g., defrost to floor), and potential HVAC system warning lights.
3. What causes the B295E code to trigger?
The code is usually caused by a faulty mode door actuator, damaged or disconnected wiring in the potentiometer feedback circuit, or a malfunctioning HVAC control module.
4. Can a bad mode door actuator cause the B295E code?
Yes, a faulty mode door actuator is a common culprit for the B295E code, as it houses the potentiometer that provides feedback to the HVAC system.
5. How do you diagnose the B295E code on a Mercury?
Start by checking the wiring and connections to the mode door actuator for damage or disconnection. Then test the actuator and potentiometer with a multimeter to ensure proper operation.
6. Is it safe to drive with the B295E code present?
Yes, it’s generally safe to drive, but you may experience discomfort due to improper airflow direction or failure to defog the windshield effectively.
7. How do you fix the B295E code in a Mercury?
Repairs may involve replacing the mode door actuator, repairing or reconnecting damaged wiring, or reprogramming the HVAC control module if necessary.
8. How much does it cost to repair the B295E code?
Repair costs vary but typically range from $150 to $400, depending on whether the mode door actuator or wiring needs replacement.
9. Can you clear the B295E code without repairing the issue?
You can clear the code with an OBDII scanner, but it will likely return unless the underlying issue is resolved.
10. Will a faulty HVAC control module cause the B295E code?
While less common, a malfunctioning HVAC control module could potentially cause this code if it cannot properly interpret the feedback from the mode door potentiometer.
Discuss the causes and fixes for B295E Mercury OBDII Code
Code B295E Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
