B295C Mercury Code - Right Blend Door Potentiometer Feedback Circuit Open
Quick Answer
Under normal operation, to rotate the blend door actuator, the Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC) module supplies voltage to the actuator motors through the door actuator clockwise circuits, and supplies ground through the door actuator counterclockwise circuits. Common causes include Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted, Right Blend Door Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B295C Mercury indicates Right Blend Door Potentiometer Feedback Circuit Open.
- Common causes
- Common causes include Faulty Right Blend Door Actuator, Right Blend Door Actuator harness is open or shorted, Right Blend Door Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B295C Mercury Description
The actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the door actuator return circuits and a 5-volt reference voltage on the door actuator reference circuits. The EMTC module or EATC module reads the voltage on the blend door actuator feedback circuits to determine the door actuator position, by the position of the actuator feedback resistor wiper arm.
What are the Possible Causes of the DTC B295C Mercury?
- Faulty Right Blend Door Actuator
- Right Blend Door Actuator harness is open or shorted
- Right Blend Door Actuator circuit poor electrical connection
- Faulty Electronic Manual Temperature Control (EMTC) or Electronic Automatic Temperature Control (EATC)
How to Fix the DTC B295C Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B295C Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B295C Mercury code?
Need more information on how to fix the B295C Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B295C Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B295C Mercury Code
1. What does OBDII code B295C mean on a Mercury vehicle?
The B295C code indicates an issue with the right blend door potentiometer feedback circuit, specifically that the circuit is open.
2. What are the symptoms of code B295C in a Mercury?
Common symptoms include inconsistent cabin temperature, inability to control airflow direction, and unusual noises from the HVAC system.
3. What causes the B295C code to appear?
The code is typically caused by a faulty blend door actuator, damaged wiring, a disconnected harness, or a failed potentiometer.
4. Can I still drive my Mercury with a B295C code?
Yes, the vehicle is still drivable, but you may experience discomfort due to improper climate control functionality.
5. How do I diagnose a B295C code?
Start by inspecting the wiring and connections to the right blend door actuator, then test the potentiometer for proper resistance values.
6. What repairs are needed to fix the B295C code?
Repairs may involve replacing the blend door actuator, repairing damaged wiring, or reconnecting loose connectors.
7. How much does it cost to repair a B295C code on a Mercury?
The cost varies but typically ranges from $150 to $300, depending on whether you replace the actuator or repair wiring.
8. Can a B295C code be cleared without repairs?
Clearing the code without fixing the underlying issue will only result in the code returning when the problem is detected again.
9. What tools are needed to troubleshoot the B295C code?
You'll need a multimeter for testing the potentiometer and wiring, as well as an OBDII scanner to read and clear the code.
10. Is the B295C code specific to Mercury vehicles?
While this code is common in Mercury vehicles, it may also appear in other Ford-related brands with similar HVAC systems.
Discuss the causes and fixes for B295C Mercury OBDII Code
Code B295C Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
