AutoCodes – Buick – B2955 Buick

B2955 Buick Code - Security Sensor Data Circuit Malfunction

Quick Answer

When an ignition key is inserted into the ignition lock cylinder and the ignition is switched ON, the transponder embedded in the key is energized by the exciter coil surrounding the ignition lock cylinder. Common causes include Faulty Immobilizer Control Module, Immobilizer Control Module harness is open or shorted, Immobilizer Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2955 Buick indicates Security Sensor Data Circuit Malfunction.
Common causes: Common causes include Faulty Immobilizer Control Module, Immobilizer Control Module harness is open or shorted, Immobilizer Control Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,786

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 01, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2955 Buick Description

When an ignition key is inserted into the ignition lock cylinder and the ignition is switched ON, the transponder embedded in the key is energized by the exciter coil surrounding the ignition lock cylinder. The transponder transmits a signal to the Immobilizer Control Module. The Immobilizer Control Module translates this signal to a serial data message which is sent to the Body Control Module (BCM). The BCM then compares this value to a value stored in memory. If the value is correct, the BCM will send the prerelease password via the serial data circuit to the Engine Control Module (ECM). If the learned key code does not match or a transponder value is not received, the BCM will send the start disable password to the ECM. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a circuit fault on the immobilizer antenna circuits.

OBDII Code B2955 Buick - Security Sensor Data Circuit Malfunction - AutoCodes.com — B2955 Buick Code - Security Sensor Data Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC B2955 Buick?

Faulty Immobilizer Control Module
Immobilizer Control Module harness is open or shorted
Immobilizer Control Module circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B2955 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2955 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2955 Buick code?

Need more information on how to fix the B2955 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2955 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.