AutoCodesMercury – B2936 Mercury

B2936 Mercury Code - Gate Motor Open

Quick Answer

The Liftgate/Trunk Module (LTM) monitors the Gate Motor. Common causes include Faulty Gate Motor, Gate Motor harness is open or shorted, Gate Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2936 Mercury indicates Gate Motor Open.
Common causes
Common causes include Faulty Gate Motor, Gate Motor harness is open or shorted, Gate Motor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 696
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Feb 13, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2936 Mercury Description

The Liftgate/Trunk Module (LTM) monitors the Gate Motor. The LTM sets the OBDII code when a continuous memory and on-demand Diagnostic Trouble Code (DTC) that sets when the LTM detects an open on the power liftgate motor circuit(s). The LTM determines the circuit(s) is open when it detects no current change upon liftgate motor activation.
OBDII Code B2936 Mercury - Gate Motor Open - AutoCodes.com
B2936 Mercury Code - Gate Motor Open

What are the Possible Causes of the DTC B2936 Mercury?

  • Faulty Gate Motor
  • Gate Motor harness is open or shorted
  • Gate Motor circuit poor electrical connection
  • Faulty Liftgate/Trunk Module (LTM)

How to Fix the DTC B2936 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2936 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2936 Mercury code?

Need more information on how to fix the B2936 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2936 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2936 Mercury Code

1. What does the OBDII code B2936 mean on a Mercury vehicle?

The code B2936 indicates an issue with the gate motor circuit, specifically that the system has detected an open circuit in the gate motor.

2. What are the common symptoms of the B2936 code in a Mercury?

Symptoms may include the tailgate or liftgate not opening or closing properly, unusual noises when operating the gate, or no response from the gate motor.

3. What causes the B2936 code to trigger on a Mercury?

The code is typically caused by a damaged or disconnected wiring harness, a faulty gate motor, blown fuses, or a malfunctioning control module.

4. How can I diagnose the B2936 code on my Mercury?

Start by inspecting the wiring and connections to the gate motor for damage or corrosion. Check the fuses and test the motor for continuity using a multimeter.

5. Can I drive my Mercury with the B2936 code active?

Yes, you can drive the vehicle, but the tailgate or liftgate may not function properly, which could be inconvenient and a safety concern if you need access to the rear.

6. How do I fix the B2936 code on a Mercury?

Repairs may include repairing or replacing damaged wiring, replacing a faulty gate motor, or resetting the system after addressing the issue.

7. How much does it cost to fix the B2936 code on a Mercury?

The repair cost depends on the specific issue. Wiring repairs may cost $50-$200, while replacing the gate motor can range from $300 to $600, including parts and labor.

8. Is it necessary to reprogram the control module after fixing the B2936 code?

In most cases, reprogramming is not required, but you may need to clear the code with an OBDII scanner after completing the repairs.

9. Can a weak battery cause the B2936 code on a Mercury?

Yes, a weak or failing battery can cause electrical issues, including triggering the B2936 code, as the gate motor requires sufficient power to operate.

10. What tools do I need to troubleshoot the B2936 code on a Mercury?

You’ll need an OBDII scanner, a multimeter for checking electrical continuity, and basic hand tools for inspecting and repairing wiring or components.

Discuss the causes and fixes for B2936 Mercury OBDII Code

Code B2936 Mercury comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play