AutoCodesGMC – B291B 2014 GMC Sierra

B291B 2014 GMC Sierra Code - Content Theft Deterrent Sensor

Quick Answer

The Body Control Module (BCM) performs various communication fault detection tests to determine if a software, hardware, or communication concern exists with the ultrasonic intrusion sensor. Common causes include Faulty Content Theft Deterrent Sensor Module, Content Theft Deterrent Sensor Module harness is open or shorted, Content Theft Deterrent Sensor Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B291B 2014 GMC Sierra indicates Content Theft Deterrent Sensor.
Common causes
Common causes include Faulty Content Theft Deterrent Sensor Module, Content Theft Deterrent Sensor Module harness is open or shorted, Content Theft Deterrent Sensor Module circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 153
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 01, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B291B 2014 GMC Sierra Description

The Body Control Module (BCM) performs various communication fault detection tests to determine if a software, hardware, or communication concern exists with the ultrasonic intrusion sensor. The sensor being disconnected, a poor connection at the connector, or the vehicle battery being discharged could all cause the communication to be interrupted. This interruption stops the self-test from completing which causes Diagnostic Trouble Code (DTC) B291B. This is not because of the sensor failing, it is because of a previous or existing open connection between the sensor and the BCM. Restoring this connection and then arming the theft system will complete the test and allow the DTC to be cleared. The DTC will be set when the BCM cannot communicate with the ultrasonic intrusion sensor.
OBDII Code B291B 2014 GMC Sierra - Content Theft Deterrent Sensor - AutoCodes.com
B291B 2014 GMC Sierra Code - Content Theft Deterrent Sensor

What are the Possible Causes of the DTC B291B 2014 GMC Sierra?

  • Faulty Content Theft Deterrent Sensor Module
  • Content Theft Deterrent Sensor Module harness is open or shorted
  • Content Theft Deterrent Sensor Module circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC B291B 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B291B 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B291B 2014 GMC Sierra code?

Need more information on how to fix the B291B 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B291B 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B291B 2014 GMC Sierra Code

What does OBDII code B291B mean on a 2014 GMC Sierra?

Code B291B indicates an issue with the Content Theft Deterrent (CTD) system sensor, which is responsible for monitoring unauthorized vehicle access.

What are the symptoms of code B291B on a 2014 GMC Sierra?

Common symptoms include the theft deterrent system not functioning properly, false alarms, or the inability to arm the system.

What causes code B291B to appear on a 2014 GMC Sierra?

This code is typically caused by a malfunctioning CTD sensor, wiring issues, a blown fuse, or a problem with the control module.

Can B291B affect the vehicle's operation?

No, this code typically does not affect the vehicle’s drivability but compromises the theft deterrent system's functionality.

How can I diagnose code B291B?

Use an OBDII scanner to confirm the code, visually inspect the CTD sensor and wiring, and check for blown fuses or connector issues.

How do I fix code B291B on a 2014 GMC Sierra?

Repairs may include replacing the CTD sensor, repairing damaged wiring, or resetting the theft deterrent system through the control module.

Where is the CTD sensor located on a 2014 GMC Sierra?

The CTD sensor is usually located near the ignition switch or within the vehicle's security module system.

Can a weak battery trigger code B291B?

Yes, a weak or failing battery can sometimes disrupt the theft deterrent system and cause this code to appear.

Do I need to reprogram the theft deterrent system after fixing code B291B?

In some cases, reprogramming or resetting the theft deterrent system may be required after replacing the sensor or repairing wiring.

Can I drive with code B291B on my 2014 GMC Sierra?

Yes, you can drive the vehicle, but the theft deterrent system may not function properly, leaving the vehicle vulnerable to theft.

Discuss the causes and fixes for B291B 2014 GMC Sierra OBDII Code

Code B291B 2014 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play