B2872 Ford Code - Tire Pressure Sensor Fault
Quick Answer
The Tire Pressure Monitor (TPM) system monitors the air pressure in the 4 road tires with wheel-mounted tire pressure sensors. Common causes include Low tire pressure, Tire pressure sensor is missing or damaged, Spare tire is installed as a road wheel. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2872 Ford indicates Tire Pressure Sensor Fault.
- Common causes
- Common causes include Low tire pressure, Tire pressure sensor is missing or damaged, Spare tire is installed as a road wheel.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2872 Ford Description
Each tire pressure sensor transmission is compared against a low-pressure limit (pressure listed on vehicle certification label minus 25 percent, which will be about 6-9 psi). If it is determined that the tire pressure has fallen below this limit, the SJB sends a message to the instrument cluster, which then illuminates the low pressure warning indicator and displays the appropriate message(s) in the message center (if equipped).
What are the Possible Causes of the DTC B2872 Ford?
- Low tire pressure
- Tire pressure sensor is missing or damaged
- Spare tire is installed as a road wheel
- Incorrect tire pressure sensor is installed
- Tire pressure sensor installed incorrectly
- Faulty Tire Pressure Sensor
How to Fix the DTC B2872 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2872 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2872 Ford code?
Need more information on how to fix the B2872 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2872 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2872 Ford Code
1. What are the common symptoms of OBDII code B2872 for a Ford vehicle?
The common symptoms include a tire pressure monitoring system (TPMS) warning light on the dashboard, inaccurate tire pressure readings, and issues with the TPMS functionality.
2. What causes the OBDII code B2872 Tire Pressure Sensor Fault in Ford vehicles?
This code is typically triggered by a faulty tire pressure sensor, low sensor battery, sensor communication issues, or a problem with the TPMS module.
3. How can I diagnose the OBDII code B2872 in my Ford vehicle?
To diagnose this code, you can use an OBDII scanner to read the specific error code, check the tire pressure sensor batteries, inspect the sensor for physical damage, and ensure proper sensor communication.
4. Can a DIY enthusiast repair the OBDII code B2872 Tire Pressure Sensor Fault?
DIY enthusiasts with the necessary tools and expertise can attempt to replace the faulty tire pressure sensor, but it's recommended to consult a professional mechanic for accurate diagnosis and repair.
5. Are there any tips for resolving the OBDII code B2872 in a Ford vehicle?
Ensure all tires are properly inflated, check the TPMS fuse, reset the TPMS system, and clear the error code with an OBDII scanner after resolving the tire pressure sensor fault.
6. How critical is it to address the OBDII code B2872 in a Ford vehicle promptly?
While the vehicle can still be driven with this code, it's important to address it promptly to ensure accurate tire pressure monitoring, optimal safety, and to prevent potential tire-related issues.
7. Are there any safety implications associated with the OBDII code B2872 Tire Pressure Sensor Fault?
Driving with a faulty tire pressure sensor can lead to incorrect tire pressure readings, potentially causing unsafe driving conditions, reduced fuel efficiency, and uneven tire wear.
8. Can extreme weather conditions trigger the OBDII code B2872 in Ford vehicles?
Extreme temperatures and weather conditions can sometimes affect tire pressure sensors, leading to false readings and potentially triggering the B2872 code.
9. Is it possible for multiple tire pressure sensors to fail simultaneously, causing the OBDII code B2872?
While it's less common for multiple sensors to fail simultaneously, it's not impossible. However, individual sensor diagnosis is recommended to accurately identify the faulty unit.
10. How can I prevent the OBDII code B2872 Tire Pressure Sensor Fault in my Ford vehicle?
Regularly check and maintain proper tire pressure, avoid impacts that could damage the sensors, and have the TPMS system inspected during routine vehicle maintenance to help prevent this code from occurring.
Discuss the causes and fixes for B2872 Ford OBDII Code
Code B2872 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
