B27A6 2013 Toyota RAV4 Code - Open In Rear Floor Electrical Key Oscillator Circuit
Quick Answer
The Certification ECU (Smart Key ECU Assembly) generates a request signal and sends it to the Indoor Electrical Key Oscillator (for center floor). Common causes include Faulty Indoor Electrical Key Oscillator (for center floor), Indoor Electrical Key Oscillator harness is open or shorted, Indoor Electrical Key Oscillator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B27A6 2013 Toyota RAV4 indicates Open In Rear Floor Electrical Key Oscillator Circuit.
- Common causes
- Common causes include Faulty Indoor Electrical Key Oscillator (for center floor), Indoor Electrical Key Oscillator harness is open or shorted, Indoor Electrical Key Oscillator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B27A6 2013 Toyota RAV4 Description
The Diagnostic Trouble Code (DTC) B27A6 is detected by the Certification ECU (Smart Key ECU Assembly) when an open circuit occurs between the Certification ECU (Smart Key ECU Assembly) and Indoor Electrical Key Oscillator (for center floor) terminals.
What are the Possible Causes of the DTC B27A6 2013 Toyota RAV4?
- Faulty Indoor Electrical Key Oscillator (for center floor)
- Indoor Electrical Key Oscillator harness is open or shorted
- Indoor Electrical Key Oscillator circuit poor electrical connection
- Faulty Certification ECU (Smart Key ECU Assembly)
How to Fix the DTC B27A6 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B27A6 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B27A6 2013 Toyota RAV4 code?
Need more information on how to fix the B27A6 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B27A6 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B27A6 2013 Toyota RAV4 Code
1. What are the common symptoms of OBDII code B27A6 in a 2013 Toyota RAV4?
- Common symptoms include issues with the keyless entry system, difficulty starting the vehicle, and sporadic or complete loss of key fob functionality.
2. What does the OBDII code B27A6 "Open In Rear Floor Electrical Key Oscillator Circuit" indicate in a 2013 Toyota RAV4?
- This code indicates a problem with the electrical circuit for the key oscillator in the rear floor area of the vehicle.
3. What are the possible causes of OBDII code B27A6 in a 2013 Toyota RAV4?
- Possible causes include damaged wiring, loose connections, a faulty key fob, or a malfunctioning key oscillator module.
4. How can I diagnose the issue related to OBDII code B27A6 in my 2013 Toyota RAV4?
- Diagnosing the problem may require checking the wiring connections, inspecting the key fob for damage, testing the key oscillator module, and using a diagnostic scanner to pinpoint the exact issue.
5. Is it safe to continue driving my 2013 Toyota RAV4 with the B27A6 trouble code?
- It is not recommended to continue driving the vehicle with this code present, as it may lead to further keyless entry system malfunctions or starting issues.
6. Can I repair the OBDII code B27A6 issue in my 2013 Toyota RAV4 myself?
- Depending on your automotive repair skills, you may be able to address the problem by checking wiring connections, replacing a faulty key fob, or repairing the key oscillator circuit. However, professional diagnosis and repair may be necessary.
7. Are there any simple troubleshooting steps I can take for OBDII code B27A6 in my 2013 Toyota RAV4?
- You can start by checking the key fob battery, ensuring the key fob is functioning properly, inspecting visible wiring for damage, and resetting the vehicle's computer system.
8. How much can I expect to pay to repair OBDII code B27A6 in a 2013 Toyota RAV4 at a dealership or repair shop?
- Repair costs for this issue can vary based on the exact cause of the problem, but expect to pay for diagnostic time, parts replacement, and labor, which could range from a few hundred to over a thousand dollars.
9. Will resetting the OBDII codes clear the B27A6 trouble code in my 2013 Toyota RAV4?
- Resetting the OBDII codes may temporarily clear the code, but if the underlying issue causing the B27A6 code is not addressed and fixed, the code is likely to reappear after some driving cycles.
10. How urgent is it to address the OBDII code B27A6 "Open In Rear Floor Electrical Key Oscillator Circuit" in a 2013 Toyota RAV4?
- It is advisable to address this issue promptly to prevent potential keyless entry system failures or starting problems in your 2013 Toyota RAV4.
Discuss the causes and fixes for B27A6 2013 Toyota RAV4 OBDII Code
Code B27A6 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
