B27A5 Scion Code - Open In Front Floor Electrical Key Oscillator Circuit
Quick Answer
The Certification ECU (Smart Key ECU Assembly) generates a request signal and sends it to the Indoor Electrical Key Oscillator (for front floor). Common causes include Faulty Indoor Electrical Key Oscillator (for front floor), Indoor Electrical Key Oscillator harness is open or shorted, Indoor Electrical Key Oscillator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B27A5 Scion indicates Open In Front Floor Electrical Key Oscillator Circuit.
- Common causes
- Common causes include Faulty Indoor Electrical Key Oscillator (for front floor), Indoor Electrical Key Oscillator harness is open or shorted, Indoor Electrical Key Oscillator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B27A5 Scion Description
The Diagnostic Trouble Code (DTC) B27A5 is detected by the Certification ECU (Smart Key ECU Assembly) when an open circuit occurs between the Certification ECU (Smart Key ECU Assembly) and Indoor Electrical Key Oscillator (for front floor) terminals.
What are the Possible Causes of the DTC B27A5 Scion?
- Faulty Indoor Electrical Key Oscillator (for front floor)
- Indoor Electrical Key Oscillator harness is open or shorted
- Indoor Electrical Key Oscillator circuit poor electrical connection
- Faulty Certification ECU (Smart Key ECU Assembly)
How to Fix the DTC B27A5 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B27A5 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B27A5 Scion code?
Need more information on how to fix the B27A5 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B27A5 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B27A5 Scion Code
1. What does OBDII code B27A5 mean on a Scion?
Code B27A5 indicates an "Open In Front Floor Electrical Key Oscillator Circuit," meaning there is an issue with the circuit responsible for detecting the key’s signal near the front floor area.
2. What are the symptoms of code B27A5?
Common symptoms include the vehicle not recognizing the key fob, difficulty starting the car with the push-button ignition, or a key detection error message on the dashboard.
3. What causes code B27A5 to trigger?
This code can be caused by a damaged front floor key oscillator, a broken or disconnected wiring harness, a faulty key fob battery, or issues with the key detection system control module.
4. How do I fix code B27A5 on my Scion?
Inspect the front floor electrical key oscillator and its wiring for damage or disconnection. Replace the oscillator if necessary and ensure all connections are secure. Also, check the key fob battery and replace it if weak.
5. Can a weak key fob battery cause code B27A5?
Yes, a weak or dead key fob battery can interfere with signal transmission, which might trigger this code. Replacing the battery is a simple first step in troubleshooting.
6. Where is the front floor electrical key oscillator located?
The front floor electrical key oscillator is typically located under the front floor area, near the driver or passenger footwell, depending on the vehicle model.
7. Can I drive with code B27A5 active?
You may be able to drive, but intermittent key recognition or starting issues could occur. It’s recommended to address this issue promptly to avoid being stranded.
8. How much does it cost to repair code B27A5?
Repair costs can vary but typically range from $100 to $300, depending on whether the issue is with the oscillator, wiring, or related components.
9. Can a faulty key fob cause code B27A5?
Yes, a malfunctioning key fob or one with a damaged internal transmitter can prevent proper communication with the oscillator, triggering this code.
10. Do I need to reprogram the key fob after fixing code B27A5?
Reprogramming is usually not required unless the key fob itself was replaced or the issue involved the vehicle’s key detection system being reset.
Discuss the causes and fixes for B27A5 Scion OBDII Code
Code B27A5 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
