B2798 2014 Toyota RAV4 Code - Communication Malfunction No. 2 Immobilizer System
Quick Answer
The Diagnostic Trouble Code (DTC) B2798 is stored when a key is inserted into the ignition key cylinder, but a communication error occurs between the key and Transponder Key ECU Assembly. Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2798 2014 Toyota RAV4 indicates Communication Malfunction No. 2 Immobilizer System.
- Common causes
- Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2798 2014 Toyota RAV4 Description
What are the Possible Causes of the DTC B2798 2014 Toyota RAV4?
- Faulty Key
- Faulty Transponder Key Coil
- Faulty Transponder Key ECU Assembly
How to Fix the DTC B2798 2014 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2798 2014 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2798 2014 Toyota RAV4 code?
Need more information on how to fix the B2798 2014 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2798 2014 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2798 2014 Toyota RAV4 Code
What does the OBDII code B2798 mean on a 2014 Toyota RAV4?
The code B2798 indicates a "Communication Malfunction No. 2" in the immobilizer system, meaning there's a problem with communication between the key, immobilizer, and engine control module (ECM).
What are the symptoms of code B2798 in a 2014 Toyota RAV4?
Typical symptoms include the engine not starting, the immobilizer light staying on or flashing, and possibly a stored B2798 code in the ECM.
What causes the B2798 code in a 2014 Toyota RAV4?
Common causes include a faulty transponder key, damaged immobilizer antenna coil, wiring issues between the ECM and immobilizer, or a malfunctioning immobilizer ECU.
Can a weak or dead key fob battery trigger the B2798 code?
No, a weak or dead key fob battery does not directly trigger B2798, but it might prevent the transponder signal from being read, which could lead to immobilizer issues.
How can I fix the B2798 code on my 2014 Toyota RAV4?
Repairs may involve reprogramming the key, replacing the immobilizer antenna coil, checking and repairing wiring connections, or replacing the immobilizer ECU.
Is it safe to drive with the B2798 code on a 2014 Toyota RAV4?
No, the vehicle may not start due to immobilizer system failure, making it unsafe or impossible to drive until the issue is resolved.
Can a low car battery cause the B2798 code in a 2014 Toyota RAV4?
Yes, a low or failing car battery can disrupt communication between the immobilizer components and trigger the B2798 code.
How much does it cost to repair the B2798 code on a 2014 Toyota RAV4?
Repair costs vary, but diagnostics and repairs could range from $100 to $500, depending on whether reprogramming, wiring repairs, or part replacements are needed.
Do I need to reprogram the key to clear the B2798 code?
In some cases, reprogramming the key may be required, especially if the key's transponder signal has been corrupted or replaced.
Can a DIYer fix the B2798 code on a 2014 Toyota RAV4?
If you're experienced with automotive diagnostics and electrical systems, you may be able to check wiring and connections, but key reprogramming or ECU replacement typically requires specialized equipment.
Discuss the causes and fixes for B2798 2014 Toyota RAV4 OBDII Code
Code B2798 2014 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
