B2794 2013 Toyota RAV4 Code - Unmatched Encryption Code
Quick Answer
The Diagnostic Trouble Code (DTC) B2794 is stored when a key with an incomplete key ID code is inserted into the ignition key cylinder. Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2794 2013 Toyota RAV4 indicates Unmatched Encryption Code.
- Common causes
- Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2794 2013 Toyota RAV4 Description
What are the Possible Causes of the DTC B2794 2013 Toyota RAV4?
- Faulty Key
- Faulty Transponder Key Coil
- Faulty Transponder Key ECU Assembly
How to Fix the DTC B2794 2013 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2794 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2794 2013 Toyota RAV4 code?
Need more information on how to fix the B2794 2013 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2794 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2794 2013 Toyota RAV4 Code
1. What does the OBDII code B2794 mean on a 2013 Toyota RAV4?
The B2794 code indicates an "Unmatched Encryption Code," meaning the immobilizer system detected a mismatch between the key's transponder code and the vehicle's ECU.
2. What are the common symptoms of the B2794 code in a 2013 Toyota RAV4?
Symptoms include the engine failing to start, the security light staying illuminated or flashing, and the inability to crank the engine.
3. What causes the B2794 code to appear in a Toyota RAV4?
This code is typically caused by a faulty or unprogrammed transponder key, a malfunctioning immobilizer system, or issues with the ECU not recognizing the key.
4. Can a dead battery in the key fob cause the B2794 code?
No, a dead key fob battery will not cause this code, as the transponder chip inside the key does not rely on the battery for operation.
5. How do you fix the B2794 code on a 2013 Toyota RAV4?
The fix may involve reprogramming the key, replacing the key or immobilizer system components, or repairing wiring and connections in the immobilizer circuit.
6. Does the B2794 code mean I need a new key for my Toyota RAV4?
Not necessarily. The existing key may just need to be reprogrammed to match the vehicle's immobilizer system.
7. How much does it cost to fix the B2794 code in a Toyota RAV4?
Costs can vary depending on the issue, but reprogramming a key typically ranges from $50 to $150, while replacing immobilizer components may cost significantly more.
8. Can the B2794 code be cleared with an OBDII scanner?
Clearing the code with a scanner is possible, but it will return unless the underlying issue, such as key or immobilizer mismatch, is resolved.
9. Can I fix the B2794 code myself on my 2013 Toyota RAV4?
If you have access to key programming tools and knowledge of the immobilizer system, it may be possible. Otherwise, professional assistance is recommended.
10. Do I need to take my 2013 Toyota RAV4 to the dealership to fix the B2794 code?
While a dealership can fix it, many locksmiths and independent shops with the right equipment can also resolve immobilizer-related issues.
Discuss the causes and fixes for B2794 2013 Toyota RAV4 OBDII Code
Code B2794 2013 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
