AutoCodesToyota – B2793 2017 Toyota RAV4

B2793 2017 Toyota RAV4 Code - Transponder Chip Malfunction

Quick Answer

This Diagnostic Trouble Code (DTC) is output when trouble is found in a key during the key code registration, or the key code is not registered normally. Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2793 2017 Toyota RAV4 indicates Transponder Chip Malfunction.
Common causes
Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,262
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 16, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2793 2017 Toyota RAV4 Description

This Diagnostic Trouble Code (DTC) is output when trouble is found in a key during the key code registration, or the key code is not registered normally. Replace the key when the key code registration is not performed normally, and this DTC is detected.
OBDII Code B2793 2017 Toyota RAV4 - Transponder Chip Malfunction - AutoCodes.com
B2793 2017 Toyota RAV4 Code - Transponder Chip Malfunction

What are the Possible Causes of the DTC B2793 2017 Toyota RAV4?

  • Faulty Key
  • Faulty Transponder Key Coil
  • Faulty Transponder Key ECU Assembly

How to Fix the DTC B2793 2017 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2793 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2793 2017 Toyota RAV4 code?

Need more information on how to fix the B2793 2017 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2793 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2793 2017 Toyota RAV4 Code

1. What does the OBDII code B2793 mean on a 2017 Toyota RAV4?

B2793 indicates a "Transponder Chip Malfunction," meaning the vehicle's immobilizer system cannot properly detect the transponder chip in the key.

2. What are the common symptoms of the B2793 code in a 2017 Toyota RAV4?

Symptoms include the engine not starting, the immobilizer warning light staying on, and a possible "key not detected" message.

3. What causes the B2793 code in a 2017 Toyota RAV4?

Common causes include a damaged or faulty key transponder chip, interference from electronic devices, a malfunctioning key antenna, or issues with the immobilizer system's ECU.

4. Can I still drive my 2017 Toyota RAV4 with the B2793 code?

No, the engine won’t start because the immobilizer system prevents it from running when the code is active.

5. How do I fix the B2793 code on a 2017 Toyota RAV4?

Fixes may involve reprogramming or replacing the key, inspecting the key antenna, and checking the immobilizer system’s wiring and ECU for faults.

6. Can a dead key fob battery cause the B2793 code?

No, a dead key fob battery typically prevents remote functions but doesn’t cause this code. The problem is related to the transponder chip inside the key.

7. How much does it cost to repair the B2793 code in a 2017 Toyota RAV4?

Costs vary depending on the issue. Replacing or reprogramming a key may cost $100–$300, while more extensive repairs to the immobilizer system can be more expensive.

8. Can I clear the B2793 code without repairing the issue?

Clearing the code without addressing the underlying problem will not resolve the issue, and the code will likely return.

9. How can I prevent the B2793 code from occurring in my 2017 Toyota RAV4?

Avoid dropping or damaging the key, keep electronic devices away from the key when starting the car, and maintain the immobilizer system in good condition.

10. Do I need a new key for the B2793 code?

Not always. The key might just need reprogramming or inspection. However, if the transponder chip is damaged, replacing the key may be necessary.

Discuss the causes and fixes for B2793 2017 Toyota RAV4 OBDII Code

Code B2793 2017 Toyota RAV4 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play