AutoCodes – Toyota – B2793 2013 Toyota RAV4

B2793 2013 Toyota RAV4 Code - Transponder Chip Malfunction

Quick Answer

This Diagnostic Trouble Code (DTC) is output when trouble is found in a key during the key code registration, or the key code is not registered normally. Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2793 2013 Toyota RAV4 indicates Transponder Chip Malfunction.
Common causes: Common causes include Faulty Key, Faulty Transponder Key Coil, Faulty Transponder Key ECU Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 428

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 16, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2793 2013 Toyota RAV4 Description

This Diagnostic Trouble Code (DTC) is output when trouble is found in a key during the key code registration, or the key code is not registered normally. Replace the key when the key code registration is not performed normally, and this DTC is detected.

OBDII Code B2793 2013 Toyota RAV4 - Transponder Chip Malfunction - AutoCodes.com — B2793 2013 Toyota RAV4 Code - Transponder Chip Malfunction

What does this mean?

What are the Possible Causes of the DTC B2793 2013 Toyota RAV4?

Faulty Key
Faulty Transponder Key Coil
Faulty Transponder Key ECU Assembly

How to Fix the DTC B2793 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2793 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2793 2013 Toyota RAV4 code?

Need more information on how to fix the B2793 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2793 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2793 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B2793 in a 2013 Toyota RAV4?

The common symptoms of OBDII code B2793, which indicates a Transponder Chip Malfunction, include issues with starting the vehicle, the engine not turning over, and the security light flashing on the dashboard.

2. What can cause the Transponder Chip Malfunction in a 2013 Toyota RAV4?

The Transponder Chip Malfunction (OBDII code B2793) in a 2013 Toyota RAV4 can be caused by a faulty transponder key, a damaged key fob, issues with the immobilizer system, or a problem with the transponder chip itself.

3. How can I diagnose a Transponder Chip Malfunction in my 2013 Toyota RAV4?

Diagnosing a Transponder Chip Malfunction involves checking the transponder key, key fob, immobilizer system, and the transponder chip for any visible damage or malfunction. It is recommended to consult a professional mechanic or dealership for an accurate diagnosis.

4. What repairs are needed to fix OBDII code B2793 in a 2013 Toyota RAV4?

To fix OBDII code B2793, the Transponder Chip Malfunction in a 2013 Toyota RAV4, repairs may include reprogramming the transponder key, replacing the key fob, repairing the immobilizer system, or replacing the transponder chip if necessary.

5. Can I fix the Transponder Chip Malfunction in my 2013 Toyota RAV4 myself?

While some simple fixes like replacing the battery in the key fob can be done by the owner, diagnosing and repairing the Transponder Chip Malfunction (OBDII code B2793) in a 2013 Toyota RAV4 may require specialized tools and knowledge best left to professionals.

6. How much does it cost to repair OBDII code B2793 in a 2013 Toyota RAV4?

The cost of repairing OBDII code B2793, the Transponder Chip Malfunction in a 2013 Toyota RAV4, can vary depending on the root cause of the issue and the necessary repairs. It is recommended to obtain quotes from mechanics or dealerships for an accurate estimate.

7. Can a Transponder Chip Malfunction cause other problems in a 2013 Toyota RAV4?

While the Transponder Chip Malfunction (OBDII code B2793) itself may not directly cause other problems, it can lead to issues with starting the vehicle, potential security concerns, and inconvenience if not addressed promptly.

8. How important is it to repair OBDII code B2793 in a 2013 Toyota RAV4?

Repairing OBDII code B2793, the Transponder Chip Malfunction in a 2013 Toyota RAV4, is important to ensure proper functioning of the vehicle's immobilizer system, starting mechanism, and overall security features. Ignoring this code can lead to potential starting issues or security risks.

9. Can a DIY key reprogramming kit fix OBDII code B2793 in a 2013 Toyota RAV4?

Some DIY key reprogramming kits may help resolve issues related to key fob programming, but for a Transponder Chip Malfunction (OBDII code B2793) in a 2013 Toyota RAV4, it is recommended to consult a professional for an accurate diagnosis and repair.

10. How can I prevent OBDII code B2793 from occurring in my 2013 Toyota RAV4?

To prevent OBDII code B2793, the Transponder Chip Malfunction in a 2013 Toyota RAV4, make sure to regularly maintain your key fob, avoid physical damage to the transponder chip, and have any starting issues or security concerns addressed promptly by a qualified mechanic.