AutoCodes – Toyota – B2782 2013 Toyota RAV4

B2782 2013 Toyota RAV4 Code - Power Source Control ECU Malfunction

Quick Answer

The Certification ECU (Smart Key ECU Assembly) has a power source mode switching function. Common causes include Faulty Steering Lock ECU (Steering Lock Actuator Assembly), Steering Lock ECU harness is open or shorted, Steering Lock ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2782 2013 Toyota RAV4 indicates Power Source Control ECU Malfunction.
Common causes: Common causes include Faulty Steering Lock ECU (Steering Lock Actuator Assembly), Steering Lock ECU harness is open or shorted, Steering Lock ECU circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 441

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 16, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2782 2013 Toyota RAV4 Description

The Certification ECU (Smart Key ECU Assembly) has a power source mode switching function. This Diagnostic Trouble Code (DTC) is stored when the IGE input (the steering lock motor activation permission signal) sent directly from the Certification ECU (Smart Key ECU Assembly) to the Steering Lock ECU (Steering Lock Actuator Assembly) is determined to be abnormal.

OBDII Code B2782 2013 Toyota RAV4 - Power Source Control ECU Malfunction - AutoCodes.com — B2782 2013 Toyota RAV4 Code - Power Source Control ECU Malfunction

What does this mean?

What are the Possible Causes of the DTC B2782 2013 Toyota RAV4?

Faulty Steering Lock ECU (Steering Lock Actuator Assembly)
Steering Lock ECU harness is open or shorted
Steering Lock ECU circuit poor electrical connection
Faulty Certification ECU (Smart Key ECU Assembly)

How to Fix the DTC B2782 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2782 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2782 2013 Toyota RAV4 code?

Need more information on how to fix the B2782 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2782 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2782 2013 Toyota RAV4 Code

1. What does OBDII code B2782 mean on a 2013 Toyota RAV4?

Code B2782 indicates a Power Source Control ECU Malfunction, meaning thereâ€™s an issue with the ECU that manages the vehicle's power source and keyless ignition system.

2. What are the symptoms of code B2782 in a 2013 Toyota RAV4?

Common symptoms include difficulty starting the vehicle, unresponsive push-button start, or irregular key detection.

3. What causes the B2782 code to appear in a Toyota RAV4?

This code can be caused by a faulty Power Source Control ECU, damaged wiring or connectors, a dead key fob battery, or interference with the keyless entry system.

4. How can I troubleshoot the B2782 code on my 2013 Toyota RAV4?

Begin by checking the key fob battery, inspecting the wiring and connectors to the Power Source Control ECU, and scanning for additional codes to narrow down the issue.

5. Can I drive my 2013 Toyota RAV4 with the B2782 code?

Itâ€™s not recommended, as this code can cause intermittent starting issues or leave you stranded if the ignition system fails completely.

6. How do you fix the B2782 code on a Toyota RAV4?

Repairs may involve replacing the Power Source Control ECU, repairing damaged wiring or connectors, or reprogramming the ECU with Toyotaâ€™s diagnostic tools.

7. How much does it cost to fix the B2782 code on a 2013 Toyota RAV4?

Repair costs can range from $300 to $800, depending on whether the ECU needs replacement or if itâ€™s a simpler wiring issue.

8. Can a weak or dead key fob battery trigger the B2782 code?

Yes, a weak or dead key fob battery can cause communication issues, potentially triggering this code.

9. Do I need to reprogram the ECU to fix the B2782 code?

In some cases, reprogramming the Power Source Control ECU may be necessary after repair or replacement to ensure proper functionality.

10. What tools are needed to diagnose the B2782 code?

Youâ€™ll need an OBDII scanner capable of reading Toyota-specific codes, a multimeter for electrical checks, and potentially Toyotaâ€™s Techstream diagnostic software for advanced troubleshooting.