B276C Dodge Code - Right Hood Hinge Pedestrian Protection Squib
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the Electronic Pedestrian Protection actuator squibs to verify the integrity of the squib and the wiring. Common causes include Faulty Right Electronic Pedestrian Hood Hinge Actuator, Right Electronic Pedestrian Hood Hinge Actuator harness is open or shorted, Right Electronic Pedestrian Hood Hinge Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B276C Dodge indicates Right Hood Hinge Pedestrian Protection Squib.
- Common causes
- Common causes include Faulty Right Electronic Pedestrian Hood Hinge Actuator, Right Electronic Pedestrian Hood Hinge Actuator harness is open or shorted, Right Electronic Pedestrian Hood Hinge Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B276C Dodge Description
The ORC will set this Diagnostic Trouble Code (DTC) if it detects low resistance between the Electronic Pedestrian Protection Module (EPPM) Squib 2 circuits. The DTC will set when the EPPM squib 2 circuits become shorted together for more than 2.5 seconds. The DTC will go from active to stored when the module sees a recovery from the shorted together for more than 2.6 seconds.
What are the Possible Causes of the DTC B276C Dodge?
- Faulty Right Electronic Pedestrian Hood Hinge Actuator
- Right Electronic Pedestrian Hood Hinge Actuator harness is open or shorted
- Right Electronic Pedestrian Hood Hinge Actuator circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B276C Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B276C Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B276C Dodge code?
Need more information on how to fix the B276C Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B276C Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B276C Dodge Code
1. What are common symptoms of OBDII code B276C in a Dodge related to the Right Hood Hinge Pedestrian Protection Squib?
- Common symptoms include an illuminated check engine light, a message on the instrument cluster indicating an issue with the pedestrian protection system, and potential non-deployment of the pedestrian protection system in the event of a collision.
2. What could cause OBDII code B276C to trigger in a Dodge?
- The code B276C is typically triggered by a fault in the Right Hood Hinge Pedestrian Protection Squib, which could be due to a wiring issue, a faulty squib itself, or a problem with the pedestrian protection system module.
3. How can I diagnose the cause of OBDII code B276C in my Dodge?
- To diagnose the cause of code B276C, a professional diagnostic scan tool can be used to read the specific fault codes stored in the system. Additionally, a visual inspection of the wiring and connections related to the Right Hood Hinge Pedestrian Protection Squib can help identify any visible issues.
4. Is it safe to continue driving my Dodge with OBDII code B276C present?
- It is not recommended to continue driving your Dodge with the B276C code present, as it indicates a fault in the pedestrian protection system that may affect its proper function in the event of a collision. It is advisable to have the issue diagnosed and repaired as soon as possible.
5. Can I reset OBDII code B276C in my Dodge without addressing the underlying issue?
- While you can clear the code temporarily with an OBDII scanner, it will likely reappear if the underlying issue with the Right Hood Hinge Pedestrian Protection Squib is not addressed. It is important to diagnose and repair the root cause to prevent further safety concerns.
6. How much does it typically cost to repair OBDII code B276C related to the Right Hood Hinge Pedestrian Protection Squib in a Dodge?
- The cost of repairing OBDII code B276C can vary depending on the exact cause of the issue. Costs may range from a few hundred to over a thousand dollars, including parts and labor.
7. Can I repair OBDII code B276C in my Dodge myself, or do I need to take it to a professional mechanic?
- Repairing OBDII code B276C related to the Right Hood Hinge Pedestrian Protection Squib typically requires specialized knowledge and tools. It is recommended to take your Dodge to a professional mechanic or dealership for proper diagnosis and repair.
8. Are there any recalls or technical service bulletins related to OBDII code B276C in Dodge vehicles?
- It's advisable to check with the Dodge dealership or the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to OBDII code B276C in your specific Dodge model.
9. How long does it take to repair OBDII code B276C in a Dodge?
- The time it takes to repair OBDII code B276C can vary based on the exact cause of the issue and the availability of parts. In general, the repair process may take a few hours to a full day, depending on the complexity of the repair.
10. Can OBDII code B276C be a recurring issue in Dodge vehicles?
- If the underlying cause of OBDII code B276C related to the Right Hood Hinge Pedestrian Protection Squib is not properly addressed, it can become a recurring issue. Regular maintenance and prompt repairs can help prevent the code from reoccurring.
Discuss the causes and fixes for B276C Dodge OBDII Code
Code B276C Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
