B276B Jeep Code - Left Hood Hinge Pedestrian Protection Squib
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the Electronic Pedestrian Protection actuator squibs to verify the integrity of the squib and the wiring. Common causes include Faulty Left Electronic Pedestrian Hood Hinge Actuator, Left Electronic Pedestrian Hood Hinge Actuator harness is open or shorted, Left Electronic Pedestrian Hood Hinge Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B276B Jeep indicates Left Hood Hinge Pedestrian Protection Squib.
- Common causes
- Common causes include Faulty Left Electronic Pedestrian Hood Hinge Actuator, Left Electronic Pedestrian Hood Hinge Actuator harness is open or shorted, Left Electronic Pedestrian Hood Hinge Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B276B Jeep Description
The ORC will set this Diagnostic Trouble Code (DTC) if it detects low resistance between the Electronic Pedestrian Protection Module (EPPM) Squib 2 circuits. The DTC will set when the EPPM squib 2 circuits become shorted together for more than 2.5 seconds. The DTC will go from active to stored when the module sees a recovery from the shorted together for more than 2.6 seconds.
What are the Possible Causes of the DTC B276B Jeep?
- Faulty Left Electronic Pedestrian Hood Hinge Actuator
- Left Electronic Pedestrian Hood Hinge Actuator harness is open or shorted
- Left Electronic Pedestrian Hood Hinge Actuator circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B276B Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B276B Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B276B Jeep code?
Need more information on how to fix the B276B Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B276B Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B276B Jeep Code
1. What are the common symptoms of OBDII code B276B in a Jeep related to the Left Hood Hinge Pedestrian Protection Squib?
- Common symptoms include the airbag warning light illuminating on the dashboard, potential loss of function in the pedestrian protection system, and diagnostic trouble codes related to the squib.
2. What is the likely cause of OBDII code B276B in a Jeep concerning the Left Hood Hinge Pedestrian Protection Squib?
- The code B276B is often triggered by a fault in the pedestrian protection squib located in the left hood hinge, which may be due to wiring issues, a faulty squib, or a problem with the control module.
3. How can I diagnose the OBDII code B276B in a Jeep related to the Left Hood Hinge Pedestrian Protection Squib?
- Diagnosis involves using a compatible OBDII scanner to retrieve the specific fault code, inspecting the wiring and connections around the left hood hinge, and testing the pedestrian protection squib for continuity and proper function.
4. Is it safe to drive a Jeep with OBDII code B276B related to the Left Hood Hinge Pedestrian Protection Squib?
- It is not recommended to drive the vehicle with this fault code present, as it may indicate a problem with the pedestrian protection system, potentially compromising safety in case of a collision.
5. How can I repair OBDII code B276B in a Jeep concerning the Left Hood Hinge Pedestrian Protection Squib?
- Repair typically involves addressing the root cause of the issue, which may include repairing or replacing damaged wiring, replacing the faulty pedestrian protection squib, or reprogramming the control module if necessary.
6. Can I reset the OBDII code B276B in a Jeep related to the Left Hood Hinge Pedestrian Protection Squib myself?
- While you can clear the fault code using an OBDII scanner, it is essential to address the underlying issue causing the code to prevent it from reoccurring and ensure the proper functioning of the pedestrian protection system.
7. Are there any recalls or technical service bulletins related to OBDII code B276B in Jeeps regarding the Left Hood Hinge Pedestrian Protection Squib?
- It is recommended to check with your local Jeep dealership or visit the manufacturer's website to see if there are any recalls or technical service bulletins related to this specific fault code in your vehicle.
8. How much does it cost to repair OBDII code B276B on a Jeep associated with the Left Hood Hinge Pedestrian Protection Squib?
- Repair costs can vary depending on the exact cause of the issue, the labor rates in your area, and whether any parts need to be replaced. It is advisable to obtain a diagnosis from a qualified technician for an accurate estimate.
9. Can a DIY enthusiast with some automotive knowledge fix OBDII code B276B in a Jeep related to the Left Hood Hinge Pedestrian Protection Squib?
- While some DIY enthusiasts may have the skills to diagnose and repair this issue, working on airbag and safety systems can be complex and dangerous. It is recommended to seek professional assistance to ensure the job is done correctly and safely.
10. Will ignoring OBDII code B276B on a Jeep concerning the Left Hood Hinge Pedestrian Protection Squib cause any further damage?
- Ignoring this fault code may lead to the pedestrian protection system not functioning correctly, potentially compromising safety in the event of a collision. It is advisable to address the issue promptly to ensure the proper operation of the safety systems in your Jeep.
Discuss the causes and fixes for B276B Jeep OBDII Code
Code B276B Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
