B2765 RAM Code - Right C-Pillar Impact Acceleration Sensor
Quick Answer
The location of the right side impact sensor 2 is in the C-pillar area. Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2765 RAM indicates Right C-Pillar Impact Acceleration Sensor.
- Common causes
- Common causes include Faulty Right C-Pillar Impact Acceleration Sensor, Right C-Pillar Impact Acceleration Sensor harness is open or shorted, Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2765 RAM Description
This code will set, if the ORC and the Right Side Impact Sensor 2 do not establish and maintain valid data communications.
What are the Possible Causes of the DTC B2765 RAM?
- Faulty Right C-Pillar Impact Acceleration Sensor
- Right C-Pillar Impact Acceleration Sensor harness is open or shorted
- Right C-Pillar Impact Acceleration Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2765 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2765 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2765 RAM code?
Need more information on how to fix the B2765 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2765 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2765 RAM Code
1. What does the OBDII code B2765 mean for RAM vehicles?
The code B2765 indicates an issue with the Right C-Pillar Impact Acceleration Sensor, which is part of the vehicle's airbag system.
2. What are the common symptoms of a B2765 code?
Symptoms include an illuminated airbag warning light, potential deactivation of the airbag system, and stored trouble codes in the vehicle's ECU.
3. What causes the B2765 code to appear?
The code can be triggered by a faulty right C-pillar impact sensor, damaged wiring, poor electrical connections, or water intrusion in the sensor area.
4. Can I drive my RAM vehicle with the B2765 code?
While the vehicle may still be drivable, the airbag system could be compromised, making it unsafe in the event of a collision.
5. How do I diagnose the B2765 code?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the right C-pillar impact sensor, checking for damaged wiring, and testing the sensor’s electrical connections.
6. How do I fix the B2765 code on my RAM vehicle?
Repairs may include replacing the faulty sensor, repairing or replacing damaged wiring, or cleaning and securing electrical connections.
7. Can a faulty C-pillar sensor cause the airbags to deploy unintentionally?
No, a faulty sensor typically disables the airbag system rather than causing unintended deployment.
8. What tools are needed to fix the B2765 code?
A diagnostic scanner, multimeter, and basic automotive tools are typically required to diagnose and repair this issue.
9. How much does it cost to repair a B2765 code?
The cost varies depending on whether the sensor or wiring needs replacement, but repairs typically range from $100 to $400, including parts and labor.
10. Can a software update fix the B2765 code?
In rare cases, a software update might address communication issues with the sensor, but most often, the problem lies with hardware that requires repair or replacement.
Discuss the causes and fixes for B2765 RAM OBDII Code
Code B2765 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
