B2745 2018 Chevrolet Silverado Code - Traction Control Switch Circuit
Quick Answer
The Body Control Module (BCM) monitors the signal circuit from the traction control switch. Common causes include Faulty Multifunction Switch Instrument Panel, Multifunction Switch Instrument Panel harness is open or shorted, Multifunction Switch Instrument Panel circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2745 2018 Chevrolet Silverado indicates Traction Control Switch Circuit.
- Common causes
- Common causes include Faulty Multifunction Switch Instrument Panel, Multifunction Switch Instrument Panel harness is open or shorted, Multifunction Switch Instrument Panel circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2745 2018 Chevrolet Silverado Description
When the traction control switch is pressed and held for 5 s, the body control module will request the electronic brake control module to disable the traction control and the electronic stability control. The electronic brake control module will request the instrument cluster via serial data to turn the traction control off and stability control off indicator ON to notify the driver of the deactivation. The Diagnostic Trouble Code (DTC) sets when the BCM detects a problem in the signal circuit.
What are the Possible Causes of the DTC B2745 2018 Chevrolet Silverado?
- Faulty Multifunction Switch Instrument Panel
- Multifunction Switch Instrument Panel harness is open or shorted
- Multifunction Switch Instrument Panel circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2745 2018 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2745 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2745 2018 Chevrolet Silverado code?
Need more information on how to fix the B2745 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2745 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2745 2018 Chevrolet Silverado Code
What does the OBDII code B2745 mean for a 2018 Chevrolet Silverado?
Code B2745 indicates a fault in the traction control switch circuit, which may prevent the traction control system from functioning properly.
What are the common symptoms of code B2745 in a 2018 Chevrolet Silverado?
Symptoms include the traction control system not engaging or disengaging, a warning light on the dashboard, and potential loss of traction in slippery conditions.
What causes code B2745 in a 2018 Chevrolet Silverado?
The code can be caused by a faulty traction control switch, damaged wiring or connectors, or a malfunction in the traction control module.
How can you diagnose code B2745 in a 2018 Chevrolet Silverado?
Use an OBDII scanner to confirm the code, inspect the traction control switch for damage, and check the wiring and connectors for continuity or corrosion.
Can you drive with code B2745 in a 2018 Chevrolet Silverado?
While you can drive with this code, traction control may not function, increasing the risk of loss of control in slippery or uneven driving conditions.
How do you fix code B2745 in a 2018 Chevrolet Silverado?
Repairs may involve replacing the traction control switch, repairing damaged wiring, or reprogramming the traction control module.
What is the traction control switch's role in a 2018 Chevrolet Silverado?
The traction control switch allows the driver to manually enable or disable the traction control system under certain driving conditions.
How much does it cost to repair code B2745 in a 2018 Chevrolet Silverado?
Repair costs vary but typically range from $100 to $300, depending on whether the issue is with the switch, wiring, or module.
Can a low battery cause code B2745 in a 2018 Chevrolet Silverado?
Yes, a weak or low battery can cause electrical issues, including faults in the traction control switch circuit.
Is code B2745 related to other traction control-related codes?
Yes, issues with the traction control system may trigger additional codes like C0050 or C0242, reflecting related system faults.
Discuss the causes and fixes for B2745 2018 Chevrolet Silverado OBDII Code
Code B2745 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
