AutoCodes – Generic – B2745:02

B2745:02 Code - Traction Control Switch Circuit Short to Ground

Quick Answer

The Body Control Module (BCM) monitors the signal circuit from the traction control switch. Common causes include Faulty Multifunction Switch Instrument Panel, Multifunction Switch Instrument Panel harness is open or shorted, Multifunction Switch Instrument Panel circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2745:02 indicates Traction Control Switch Circuit Short to Ground.
Common causes: Common causes include Faulty Multifunction Switch Instrument Panel, Multifunction Switch Instrument Panel harness is open or shorted, Multifunction Switch Instrument Panel circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,762

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 01, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2745:02 Description

The Body Control Module (BCM) monitors the signal circuit from the traction control switch. When the traction control switch is pressed once, the body control module will request the electronic brake control module via serial data to disable the traction control. The electronic brake control module will request the instrument cluster via serial data to turn the traction control off indicator ON to notify the driver of the deactivation.
When the traction control switch is pressed and held for 5 s, the body control module will request the electronic brake control module to disable the traction control and the electronic stability control. The electronic brake control module will request the instrument cluster via serial data to turn the traction control off and stability control off indicator ON to notify the driver of the deactivation. The Diagnostic Trouble Code (DTC) sets when the BCM detects a short to ground on the signal circuit.

OBDII Code B2745:02 - Traction Control Switch Circuit Short to Ground - AutoCodes.com — B2745:02 Code - Traction Control Switch Circuit Short to Ground

What does this mean?

What are the Possible Causes of the DTC B2745:02?

Faulty Multifunction Switch Instrument Panel
Multifunction Switch Instrument Panel harness is open or shorted
Multifunction Switch Instrument Panel circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B2745:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2745:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2745:02 code?

Need more information on how to fix the B2745:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2745:02 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.