B2736 Dodge Code - Left Pedestrian Satellite Acceleration Sensor
Quick Answer
The Pedestrian Protection Satellite Sensors perform internal self-tests and communicate the sensors status using power supplied by the Occupant Restraint Controller (ORC). Common causes include Faulty Left Pedestrian Satellite Acceleration Sensor, Left Pedestrian Satellite Acceleration Sensor harness is open or shorted, Left Pedestrian Satellite Acceleration Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2736 Dodge indicates Left Pedestrian Satellite Acceleration Sensor.
- Common causes
- Common causes include Faulty Left Pedestrian Satellite Acceleration Sensor, Left Pedestrian Satellite Acceleration Sensor harness is open or shorted, Left Pedestrian Satellite Acceleration Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2736 Dodge Description
This DTC sets when the ORC receives notification of a self test failure within the impact sensor within 100 ms for continuous test and 1 second for startup test. Once set, this DTC is latched for the entire ignition cycle or until the clear faults scan tool command is used, depending on the specific condition that sets the DTC.
What are the Possible Causes of the DTC B2736 Dodge?
- Faulty Left Pedestrian Satellite Acceleration Sensor
- Left Pedestrian Satellite Acceleration Sensor harness is open or shorted
- Left Pedestrian Satellite Acceleration Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2736 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B2736-78 LEFT PEDESTRIAN PROTECTION SATELLITE SENSOR ALIGNMENT OR ADJUSTMENT INCORRECT
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2736 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2736 Dodge code?
Need more information on how to fix the B2736 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2736 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2736 Dodge Code
1. What are common symptoms of OBDII code B2736 in a Dodge related to the Left Pedestrian Satellite Acceleration Sensor?
The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the vehicle's airbag system.
2. What are possible causes of OBDII code B2736 in a Dodge related to the Left Pedestrian Satellite Acceleration Sensor?
Possible causes include a faulty Left Pedestrian Satellite Acceleration Sensor, wiring issues, or a problem with the airbag control module.
3. How can I diagnose the issue related to OBDII code B2736 in a Dodge?
Diagnosing the issue involves using a diagnostic scanner to retrieve the specific fault code, checking the Left Pedestrian Satellite Acceleration Sensor and its wiring for any visible damage, and testing the sensor's functionality.
4. Can I continue driving my Dodge with OBDII code B2736 related to the Left Pedestrian Satellite Acceleration Sensor?
It is not recommended to drive the vehicle with this issue as it may affect the proper functioning of the airbag system, compromising your safety in the event of a collision.
5. How can I repair OBDII code B2736 in a Dodge related to the Left Pedestrian Satellite Acceleration Sensor?
Repairing the issue may involve replacing the faulty Left Pedestrian Satellite Acceleration Sensor, repairing any damaged wiring, or reprogramming the airbag control module.
6. Are there any DIY tips for resolving OBDII code B2736 in a Dodge related to the Left Pedestrian Satellite Acceleration Sensor?
While some basic checks like inspecting the sensor and wiring can be done DIY, it is recommended to seek professional help for proper diagnosis and repair to ensure the airbag system functions correctly.
7. How much does it typically cost to fix OBDII code B2736 in a Dodge related to the Left Pedestrian Satellite Acceleration Sensor?
The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
8. Can a mechanic reset the OBDII code B2736 in a Dodge related to the Left Pedestrian Satellite Acceleration Sensor without fixing the underlying issue?
Resetting the code without addressing the root cause will only temporarily clear the fault code, and the issue is likely to reoccur, potentially affecting the airbag system's functionality.
9. Is it necessary to replace the Left Pedestrian Satellite Acceleration Sensor if OBDII code B2736 is detected in a Dodge?
If the sensor is determined to be faulty or malfunctioning, it is crucial to replace it to ensure the proper operation of the vehicle's airbag system and overall safety.
10. Can OBDII code B2736 related to the Left Pedestrian Satellite Acceleration Sensor affect the vehicle's overall performance?
While this code specifically pertains to the airbag system's sensor, unresolved issues with it can impact the vehicle's safety features and potentially affect its overall performance in the event of a collision.
Discuss the causes and fixes for B2736 Dodge OBDII Code
Code B2736 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
