B272F Mercury Code - Passenger Ignition Run/Blower Circuit Short To Ground
Quick Answer
The Seat Control Module E (SCME) supplies voltage and ground to the backrest and cushion blower motors. Common causes include Faulty Passenger Cushion or Backrest Blower Motor, Passenger Cushion or Backrest Blower Motor harness is open or shorted, Passenger Cushion or Backrest Blower Motor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B272F Mercury indicates Passenger Ignition Run/Blower Circuit Short To Ground.
- Common causes
- Common causes include Faulty Passenger Cushion or Backrest Blower Motor, Passenger Cushion or Backrest Blower Motor harness is open or shorted, Passenger Cushion or Backrest Blower Motor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B272F Mercury Description
If either the blower voltage supply or return circuits are open (to both cushion or backrest blowers) or shorted to voltage, the Diagnostic Trouble Code (DTC) is set and after 4-6 seconds the SCME disables outputs to the passenger seat. The DTC also sets if the blower voltage supply or return circuit is open to only one blower when SCME supply voltage is less than 12 volts.
What are the Possible Causes of the DTC B272F Mercury?
- Faulty Passenger Cushion or Backrest Blower Motor
- Passenger Cushion or Backrest Blower Motor harness is open or shorted
- Passenger Cushion or Backrest Blower Motor circuit poor electrical connection
- Faulty Seat Control Module E (SCME)
How to Fix the DTC B272F Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B272F Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B272F Mercury code?
Need more information on how to fix the B272F Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B272F Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B272F Mercury Code
1. What does the OBDII code B272F mean on a Mercury vehicle?
The code B272F indicates a "Passenger Ignition Run/Blower Circuit Short To Ground," meaning there is an electrical issue in the circuit responsible for the passenger-side blower or ignition run system.
2. What are the common symptoms of the B272F code in a Mercury?
Symptoms may include the passenger blower motor not functioning, erratic blower operation, or other electrical malfunctions related to the ignition run circuit.
3. What causes the B272F code to appear on a Mercury?
The primary causes include damaged wiring, a short to ground in the blower circuit, a faulty blower motor, or a malfunctioning ignition switch.
4. How do I diagnose the B272F code on my Mercury?
Start by inspecting the blower motor circuit wiring for damage or shorts, checking the connectors, and testing the blower motor and ignition switch for proper functionality.
5. Can I drive my Mercury with the B272F code active?
While the vehicle may still operate, the code indicates an electrical issue that could worsen or affect other systems, so it’s best to address the problem promptly.
6. How can I fix the B272F code on a Mercury?
Repairs could involve replacing damaged wires, fixing shorted connections, or replacing a faulty blower motor or ignition switch.
7. How much does it cost to repair the B272F code on a Mercury?
Repair costs vary depending on the issue but typically range from $100 to $300 for wiring repairs or blower motor replacement.
8. Can a blown fuse cause the B272F code on a Mercury?
Yes, a blown fuse in the blower motor circuit can lead to this code if it results in a short to ground.
9. Will clearing the B272F code with a scanner fix the issue?
Clearing the code may temporarily reset the warning, but the underlying problem must be fixed to prevent the code from returning.
10. Is the B272F code covered under warranty for Mercury vehicles?
Warranty coverage depends on the age and mileage of the vehicle, as well as the terms of your specific warranty plan.
Discuss the causes and fixes for B272F Mercury OBDII Code
Code B272F Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
