B270A Buick Code - Park Lock Solenoid Control Circuit
Quick Answer
The Body Control Module (BCM) controls the transmission shift lock control solenoid actuator by providing a battery positive voltage to the solenoid when the brake pedal is applied. Common causes include Faulty Transmission Shift Lock Control Solenoid Actuator, Transmission Shift Lock Control Solenoid Actuator harness is open or shorted, Transmission Shift Lock Control Solenoid Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B270A Buick indicates Park Lock Solenoid Control Circuit.
- Common causes
- Common causes include Faulty Transmission Shift Lock Control Solenoid Actuator, Transmission Shift Lock Control Solenoid Actuator harness is open or shorted, Transmission Shift Lock Control Solenoid Actuator circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B270A Buick Description
What are the Possible Causes of the DTC B270A Buick?
- Faulty Transmission Shift Lock Control Solenoid Actuator
- Transmission Shift Lock Control Solenoid Actuator harness is open or shorted
- Transmission Shift Lock Control Solenoid Actuator circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B270A Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B270A 02 Park Lock Solenoid Control Circuit Short to Ground
B270A 04 Park Lock Solenoid Control Circuit Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B270A Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B270A Buick code?
Need more information on how to fix the B270A Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B270A Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B270A Buick Code
1. What does the OBDII code B270A mean on a Buick?
Code B270A indicates an issue with the Park Lock Solenoid Control Circuit, which is responsible for locking or unlocking the vehicle's shifter when the brake pedal is pressed.
2. What are the common symptoms of code B270A in a Buick?
Symptoms include the inability to shift out of Park, the shifter feeling stuck, or warning lights on the dashboard.
3. What causes the B270A code to appear on a Buick?
Common causes include a faulty park lock solenoid, damaged wiring or connectors in the circuit, or a malfunctioning brake pedal switch.
4. How do I fix the B270A code on my Buick?
Check the park lock solenoid for proper operation, inspect the wiring and connectors for damage, and test the brake pedal switch. Replace any faulty components as needed.
5. Can I drive my Buick with the B270A code active?
No, the code usually prevents the vehicle from being shifted out of Park, so it must be resolved before driving.
6. How much does it cost to repair the B270A code on a Buick?
Repair costs vary, but replacing the park lock solenoid typically ranges from $100 to $300, depending on parts and labor.
7. How can I diagnose the B270A code on a Buick?
Use an OBDII scanner to confirm the code, then inspect the park lock solenoid, wiring, and brake pedal switch for faults.
8. Is the park lock solenoid the same as the shift interlock solenoid?
Yes, in most cases, the park lock solenoid is part of the shift interlock system that prevents the vehicle from shifting without pressing the brake pedal.
9. What tools do I need to fix code B270A on a Buick?
You’ll need an OBDII scanner, a multimeter for electrical testing, and basic hand tools for inspecting and replacing components.
10. Can a low battery cause the B270A code on a Buick?
Yes, a weak or low battery can sometimes cause electrical issues, including triggering the B270A code. Always check the battery voltage first.
Discuss the causes and fixes for B270A Buick OBDII Code
Code B270A Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
