AutoCodes – Generic – B26F9

B26F9 Code - Cranking Request Circuit Short

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the Body Control Module (BCM) detects that the status of the following signals does not match: Cranking request signal from Engine Control Module (ECM) and Starter control relay control signal from ECM (CAN). Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B26F9 indicates Cranking Request Circuit Short.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 746

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 22, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B26F9 Description

OBDII Code B26F9 - Cranking Request Circuit Short - AutoCodes.com — B26F9 Code - Cranking Request Circuit Short

What does this mean?

What are the Possible Causes of the DTC B26F9?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) harness is open or shorted
Engine Control Module (ECM) circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B26F9?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B26F9 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B26F9 code?

Need more information on how to fix the B26F9 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B26F9 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B26F9 Infiniti — Cranking Request Circuit Short
B26F9 Nissan — Cranking Request Circuit Short

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B26F9 Code

1. What does the OBDII code B26F9 mean?

B26F9 refers to a Cranking Request Circuit Short, indicating an issue with the electrical circuit responsible for relaying the cranking signal to the starter system.

2. What are the common symptoms of code B26F9?

Symptoms may include the engine not cranking, intermittent starting issues, or the starter motor not engaging when the key or push-button is activated.

3. What causes the B26F9 Cranking Request Circuit Short code?

This code can be caused by damaged wiring, a short circuit in the cranking request circuit, a faulty starter relay, or a malfunctioning ignition switch.

4. How is the B26F9 code diagnosed?

A technician will inspect the wiring and connectors in the cranking request circuit, check for shorts or open circuits, and test the starter relay and ignition switch for proper operation.

5. Can I still drive my vehicle with the B26F9 code active?

If the engine refuses to crank, the vehicle will not start, making it undrivable until the issue is resolved.

6. How can I fix the B26F9 code?

Common fixes include repairing or replacing damaged wiring, cleaning or reconnecting loose connectors, or replacing faulty components like the starter relay or ignition switch.

7. Is the B26F9 code related to the starter motor itself?

Not directly, but a malfunction in the cranking request circuit can prevent the starter motor from receiving the necessary signal to engage.

8. Can a weak or dead battery cause the B26F9 code?

A weak battery typically wonâ€™t cause this code, but it can mimic similar symptoms. Always check the battery's condition before diagnosing further.

9. How much does it cost to repair the B26F9 code?

Repair costs can vary but typically range between $100 to $500, depending on whether wiring repairs, relay replacements, or ignition switch replacements are needed.

10. Can I fix the B26F9 code myself?

If you have experience with automotive electrical systems, you can inspect and repair wiring and connectors. For more complex issues, consult a professional technician.