AutoCodes – Generic – B2699:02

B2699:02 Code - Right Headlamp Control Circuit Short to Ground

Quick Answer

When the Body Control Module (BCM) senses a request for low-beam headlamp illumination, the BCM sends a ground signal to the low-beam headlamp relay through the headlamp low-beam relay control circuit. Common causes include Faulty Right Low Beam Headlamp, Right Low Beam Headlamp harness is open or shorted, Right Low Beam Headlamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2699:02 indicates Right Headlamp Control Circuit Short to Ground.
Common causes
Common causes include Faulty Right Low Beam Headlamp, Right Low Beam Headlamp harness is open or shorted, Right Low Beam Headlamp circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 230
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 26, 2023
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code B2699:02 Description

When the Body Control Module (BCM) senses a request for low-beam headlamp illumination, the BCM sends a ground signal to the low-beam headlamp relay through the headlamp low-beam relay control circuit. The headlamp low beam relay will apply voltage to illuminate the headlamps. The Diagnostic Trouble Code (DTC) sets when the BCM detects a short to ground in the right low beam headlamp control circuit.
OBDII Code B2699:02 - Right Headlamp Control Circuit Short to Ground - AutoCodes.com
B2699:02 Code - Right Headlamp Control Circuit Short to Ground

What are the Possible Causes of the DTC B2699:02?

  • Faulty Right Low Beam Headlamp
  • Right Low Beam Headlamp harness is open or shorted
  • Right Low Beam Headlamp circuit poor electrical connection
  • Faulty Low Beam Headlamp Relay
  • Faulty Body Control Module (BCM)

How to Fix the DTC B2699:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2699:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2699:02 code?

Need more information on how to fix the B2699:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2699:02 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2699:02 Code

No Frequently Asked Questions about B2699:02 Code found.

Discuss the causes and fixes for B2699:02 OBDII Code

Code B2699:02 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play