B2691 Mercury Code - Left Seat Belt Switch Circuit Fault
Quick Answer
The Restraints Control Module (RCM) checks the Left Seat Belt Buckle Switch for faults. Common causes include Faulty Left Seat Belt Buckle Switch, Left Seat Belt Buckle Switch harness is open or shorted, Left Seat Belt Buckle Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2691 Mercury indicates Left Seat Belt Switch Circuit Fault.
- Common causes
- Common causes include Faulty Left Seat Belt Buckle Switch, Left Seat Belt Buckle Switch harness is open or shorted, Left Seat Belt Buckle Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2691 Mercury Description
What are the Possible Causes of the DTC B2691 Mercury?
- Faulty Left Seat Belt Buckle Switch
- Left Seat Belt Buckle Switch harness is open or shorted
- Left Seat Belt Buckle Switch circuit poor electrical connection
- Faulty Restraints Control Module (RCM)
How to Fix the DTC B2691 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2691 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2691 Mercury code?
Need more information on how to fix the B2691 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2691 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2691 Mercury Code
1. What does the OBDII code B2691 mean for a Mercury vehicle?
The B2691 code indicates a fault in the left seat belt switch circuit, which monitors the status of the driver’s seat belt for proper operation.
2. What are the common symptoms of the B2691 code in a Mercury?
Symptoms may include the seat belt warning light staying on, a chime sounding even when the seat belt is fastened, or the seat belt system not functioning as intended.
3. What causes the B2691 code to appear in a Mercury vehicle?
Common causes include a faulty seat belt switch, damaged wiring or connectors in the seat belt circuit, or a malfunction in the body control module (BCM).
4. Can I still drive my Mercury with the B2691 code active?
Yes, you can still drive the vehicle, but the seat belt warning system may not function correctly, which could be a safety concern.
5. How can I diagnose the B2691 code in my Mercury?
Start by inspecting the seat belt switch, wiring, and connectors for visible damage or wear. Use a diagnostic scanner to confirm the code and perform continuity tests on the circuit if needed.
6. How do I fix the B2691 code on a Mercury?
Repairs may involve replacing the faulty seat belt switch, repairing damaged wiring or connectors, or reprogramming or replacing the body control module if necessary.
7. How much does it typically cost to repair the B2691 code?
Repair costs can vary but usually range from $100 to $300, depending on whether the issue is with the switch, wiring, or control module.
8. Can a blown fuse cause the B2691 code to appear?
While uncommon, a blown fuse related to the seat belt circuit could potentially trigger the code. Check the fuses during diagnosis.
9. Is the B2691 code covered under warranty for a Mercury vehicle?
It depends on your warranty terms and whether the issue is due to a manufacturing defect. Check with your dealer for specifics.
10. Will clearing the B2691 code with a scanner fix the problem?
Clearing the code may temporarily turn off the warning light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for B2691 Mercury OBDII Code
Code B2691 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
