B2652 Scion Code - Front Vertical Sensor Malfunction
Quick Answer
When the Position Control ECU and Switch Assembly does not receive a sensor signal despite upward or downward movement of the front of the seat cushion by power seat motor operation, this Diagnostic Trouble Code (DTC) is stored. Common causes include Faulty Position Control ECU and Switch Assembly, Position Control ECU and Switch Assembly harness is open or shorted, Position Control ECU and Switch Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2652 Scion indicates Front Vertical Sensor Malfunction.
- Common causes
- Common causes include Faulty Position Control ECU and Switch Assembly, Position Control ECU and Switch Assembly harness is open or shorted, Position Control ECU and Switch Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2652 Scion Description
What are the Possible Causes of the DTC B2652 Scion?
- Faulty Position Control ECU and Switch Assembly
- Position Control ECU and Switch Assembly harness is open or shorted
- Position Control ECU and Switch Assembly circuit poor electrical connection
- Faulty Front Vertical Motor
How to Fix the DTC B2652 Scion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2652 Scion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2652 Scion code?
Need more information on how to fix the B2652 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2652 Scion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2652 Scion Code
1. What are the common symptoms of OBDII code B2652 in a Scion related to the Front Vertical Sensor Malfunction?
- Common symptoms include improper airbag deployment, illuminated airbag warning light on the dashboard, and potential disabling of the airbag system.
2. What are some possible causes of the Front Vertical Sensor Malfunction (B2652) in a Scion?
- Possible causes may include a faulty front vertical sensor, damaged wiring or connectors in the sensor circuit, or a malfunctioning airbag control module.
3. How serious is the Front Vertical Sensor Malfunction OBDII code B2652 in a Scion?
- This code should be taken seriously as it indicates a malfunction in a critical safety component of the airbag system. It is recommended to address the issue promptly to ensure proper airbag function in case of an accident.
4. Can I continue driving my Scion with the B2652 code related to the Front Vertical Sensor Malfunction?
- It is not advisable to drive the vehicle with this code present, as the airbag system may not deploy correctly in the event of a collision. It is recommended to have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose and repair the Front Vertical Sensor Malfunction (B2652) in my Scion?
- Diagnosis typically involves using a scan tool to retrieve the specific fault codes and then inspecting the front vertical sensor, wiring, and related components for any visible damage. Repair may involve replacing the faulty sensor or repairing the wiring as needed.
6. Will resetting the OBDII code B2652 in my Scion fix the Front Vertical Sensor Malfunction issue?
- Simply resetting the code will not fix the underlying problem causing the Front Vertical Sensor Malfunction. It is important to diagnose the root cause of the issue and perform the necessary repairs to ensure the airbag system functions properly.
7. How much does it cost to repair the Front Vertical Sensor Malfunction (B2652) in a Scion?
- The cost of repairing the Front Vertical Sensor Malfunction can vary depending on the specific cause of the issue, labor rates, and parts needed. It is recommended to consult with a qualified mechanic or dealership for an accurate estimate.
8. Can a DIY enthusiast fix the B2652 code related to the Front Vertical Sensor Malfunction in a Scion?
- While some enthusiasts may have the skills to diagnose and repair this issue, working on the airbag system can be complex and dangerous. It is recommended to have the problem addressed by a professional to ensure proper repair and safety.
9. How long does it take to repair the Front Vertical Sensor Malfunction in a Scion?
- The repair time for the Front Vertical Sensor Malfunction can vary depending on the specific cause of the issue and the expertise of the technician. In general, it may take a few hours to a full day to diagnose and repair the problem.
10. Can the Front Vertical Sensor Malfunction (B2652) code in a Scion be prevented?
- While some causes of this code may be due to wear and tear, regular maintenance and inspections of the airbag system can help prevent issues like the Front Vertical Sensor Malfunction. Promptly addressing any warning lights or unusual symptoms can also help prevent more serious problems.
Discuss the causes and fixes for B2652 Scion OBDII Code
Code B2652 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
