B2652 2016 Toyota RAV4 Code - Front Vertical Sensor Malfunction
Quick Answer
When the Position Control ECU and Switch Assembly does not receive a sensor signal despite upward or downward movement of the front of the seat cushion by power seat motor operation, this Diagnostic Trouble Code (DTC) is stored. Common causes include Faulty Position Control ECU and Switch Assembly, Position Control ECU and Switch Assembly harness is open or shorted, Position Control ECU and Switch Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2652 2016 Toyota RAV4 indicates Front Vertical Sensor Malfunction.
- Common causes
- Common causes include Faulty Position Control ECU and Switch Assembly, Position Control ECU and Switch Assembly harness is open or shorted, Position Control ECU and Switch Assembly circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2652 2016 Toyota RAV4 Description
What are the Possible Causes of the DTC B2652 2016 Toyota RAV4?
- Faulty Position Control ECU and Switch Assembly
- Position Control ECU and Switch Assembly harness is open or shorted
- Position Control ECU and Switch Assembly circuit poor electrical connection
- Faulty Front Vertical Motor
How to Fix the DTC B2652 2016 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2652 2016 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2652 2016 Toyota RAV4 code?
Need more information on how to fix the B2652 2016 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2652 2016 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2652 2016 Toyota RAV4 Code
1. What does the OBDII code B2652 mean on a 2016 Toyota RAV4?
The B2652 code indicates a malfunction with the front vertical sensor, which is part of the vehicle's automatic headlight leveling system.
2. What are the common symptoms of the B2652 code in a 2016 Toyota RAV4?
Common symptoms include malfunctioning or unresponsive automatic headlight leveling, dashboard warning lights, and headlights aiming incorrectly.
3. What causes the B2652 code to appear in a 2016 Toyota RAV4?
The code can be caused by a faulty front vertical sensor, damaged sensor wiring, poor electrical connections, or a malfunction in the headlight leveling control module.
4. How can I diagnose the B2652 code on my 2016 Toyota RAV4?
Diagnosis involves using an OBDII scanner to confirm the code, visually inspecting the front vertical sensor and wiring for damage, and testing the sensor's electrical connections and output signals.
5. Can I drive my 2016 Toyota RAV4 with the B2652 code active?
Yes, you can drive the vehicle, but the headlights may not adjust properly, which could reduce visibility or cause glare for other drivers, especially at night.
6. How do I fix the B2652 code on a 2016 Toyota RAV4?
Repairs may include replacing the front vertical sensor, repairing or replacing damaged wiring, or recalibrating the headlight leveling system.
7. Where is the front vertical sensor located on a 2016 Toyota RAV4?
The front vertical sensor is typically located near the front suspension, attached to the frame or control arm.
8. How much does it cost to fix the B2652 code on a 2016 Toyota RAV4?
Repair costs vary, but replacing the front vertical sensor typically ranges from $100 to $300, including parts and labor.
9. Can a B2652 code clear itself on a 2016 Toyota RAV4?
The code may clear temporarily if an intermittent issue resolves, but the underlying problem will likely return until properly addressed.
10. Do I need to recalibrate the headlights after fixing the B2652 code on a 2016 Toyota RAV4?
Yes, recalibration of the headlight leveling system may be necessary to ensure proper functionality after repairs.
Discuss the causes and fixes for B2652 2016 Toyota RAV4 OBDII Code
Code B2652 2016 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
