B263A 2016 GMC Sierra Code - Exterior Illumination Lamp Circuit
Quick Answer
The Body Control Module (BCM) supplies battery voltage to each exterior door handle LED backlighting, the LED lighting located under each outside rearview mirror for approach lighting, and both running board steps courtesy lamps when equipped. Common causes include Faulty Exterior Illumination Lamp, Exterior Illumination Lamp harness is open or shorted, Exterior Illumination Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B263A 2016 GMC Sierra indicates Exterior Illumination Lamp Circuit.
- Common causes
- Common causes include Faulty Exterior Illumination Lamp, Exterior Illumination Lamp harness is open or shorted, Exterior Illumination Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B263A 2016 GMC Sierra Description
What are the Possible Causes of the DTC B263A 2016 GMC Sierra?
- Faulty Exterior Illumination Lamp
- Exterior Illumination Lamp harness is open or shorted
- Exterior Illumination Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B263A 2016 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B263A:04 Exterior Illumination Lamp Circuit Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B263A 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B263A 2016 GMC Sierra code?
Need more information on how to fix the B263A 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B263A 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B263A 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code B263A in a 2016 GMC Sierra related to the Exterior Illumination Lamp Circuit?
- Common symptoms include inoperative exterior lights such as headlights, taillights, or brake lights, flickering lights, or dim lighting.
2. What are the possible causes of OBDII code B263A in a 2016 GMC Sierra?
- Possible causes may include a faulty lamp control module, damaged wiring or connectors, a blown fuse, or a defective exterior lamp.
3. How can I diagnose the issue related to the Exterior Illumination Lamp Circuit in a 2016 GMC Sierra?
- Diagnose the issue by visually inspecting the exterior lights for any visible damage, checking the fuse related to the exterior lights, and using a scan tool to retrieve the specific fault codes.
4. Can I repair OBDII code B263A in a 2016 GMC Sierra at home?
- Depending on the cause, some repairs like replacing a blown fuse or a faulty exterior lamp can be done at home. However, complex issues involving the lamp control module or wiring may require professional assistance.
5. Is it safe to continue driving a 2016 GMC Sierra with the Exterior Illumination Lamp Circuit issue?
- It is not recommended to drive the vehicle with malfunctioning exterior lights, as it can pose a safety hazard to you and other drivers on the road.
6. How much does it typically cost to repair OBDII code B263A in a 2016 GMC Sierra?
- The cost of repair can vary depending on the specific cause of the issue. Simple fixes like replacing a fuse or a bulb may be inexpensive, while more complex repairs involving modules or wiring can be costly.
7. Are there any preventive measures to avoid encountering OBDII code B263A in a 2016 GMC Sierra?
- Regularly inspecting and maintaining the exterior lights, ensuring proper electrical connections, and promptly addressing any lighting issues can help prevent the occurrence of this fault code.
8. Can extreme weather conditions affect the Exterior Illumination Lamp Circuit in a 2016 GMC Sierra?
- Yes, extreme weather conditions like heavy rain, snow, or extreme temperatures can potentially damage the exterior lights or affect the electrical components, leading to issues with the illumination circuit.
9. Will resetting the OBDII code B263A in a 2016 GMC Sierra temporarily resolve the issue?
- Resetting the code may temporarily turn off the warning light, but if the underlying problem is not addressed, the code is likely to reappear once the issue is detected again during vehicle operation.
10. How long does it typically take to repair OBDII code B263A in a 2016 GMC Sierra?
- The repair time can vary depending on the complexity of the issue and the availability of parts. Simple repairs may take a short time, while more involved repairs could require several hours or even days.
Discuss the causes and fixes for B263A 2016 GMC Sierra OBDII Code
Code B263A 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
