AutoCodesAcura – B2631 Acura

B2631 Acura Code - Center Right Rear Sensor Failure

Quick Answer

The Parking and Back-Up Sensor Control Unit monitors the Center Right Rear Sensor. Common causes include Faulty Center Right Rear Sensor, Center Right Rear Sensor harness is open or shorted, Center Right Rear Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B2631 Acura indicates Center Right Rear Sensor Failure.
Common causes
Common causes include Faulty Center Right Rear Sensor, Center Right Rear Sensor harness is open or shorted, Center Right Rear Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 884
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jan 09, 2020
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2631 Acura Description

The Parking and Back-Up Sensor Control Unit monitors the Center Right Rear Sensor. The Parking and Back-Up Sensor Control Unit sets the Diagnostic Trouble Code (DTC) when there is a Center Right Rear Sensor failure.
OBDII Code B2631 Acura - Center Right Rear Sensor Failure - AutoCodes.com
B2631 Acura Code - Center Right Rear Sensor Failure

What are the Possible Causes of the DTC B2631 Acura?

  • Faulty Center Right Rear Sensor
  • Center Right Rear Sensor harness is open or shorted
  • Center Right Rear Sensor circuit poor electrical connection
  • Faulty Parking and Back-Up Sensor Control Unit

How to Fix the DTC B2631 Acura?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2631 Acura code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2631 Acura code?

Need more information on how to fix the B2631 Acura code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2631 Acura code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2631 Acura Code

1. What does the OBDII code B2631 for Acura mean?

The code B2631 indicates a failure in the center right rear sensor, typically part of the parking or proximity sensor system.

2. What are the common symptoms of code B2631 in an Acura?

Symptoms may include malfunctioning parking sensors, inaccurate proximity alerts, or warning lights on the dashboard.

3. What causes the B2631 code to appear in an Acura?

The code can be triggered by a faulty center right rear sensor, damaged wiring, poor sensor connections, or issues with the control module.

4. Can I drive my Acura with the B2631 code active?

Yes, driving is usually safe, but parking assistance may be compromised, making it harder to judge distances when reversing or maneuvering.

5. How can I diagnose the B2631 code on my Acura?

You can use an OBDII scanner to confirm the code, then visually inspect the sensor, wiring, and connections for damage or corrosion.

6. How do I fix the B2631 code on an Acura?

Repairs may involve replacing the faulty center right rear sensor, repairing damaged wiring, or resetting the system with a scan tool.

7. How much does it cost to repair the B2631 code in an Acura?

Costs vary but typically range from $150 to $400, depending on whether the sensor needs replacement or wiring repairs are required.

8. Can I reset the B2631 code without fixing the problem?

Resetting the code without addressing the issue may clear the warning temporarily, but the code is likely to return.

9. What tools are needed to fix the B2631 code on an Acura?

You’ll need an OBDII scanner, basic hand tools, and possibly replacement sensors or wiring components.

10. Is the B2631 code unique to Acura vehicles?

No, similar codes may appear in other brands, but the specific designation and sensor location are tailored to Acura models.

Discuss the causes and fixes for B2631 Acura OBDII Code

Code B2631 Acura comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play