AutoCodes – Generic – B261F

B261F Code - ASCD Cancel/Clutch Switch

Quick Answer

The Diagnostic Trouble Code (DTC) sets when the Body Control Module (BCM) detects the following status for 10 seconds 3 times: Clutch pedal position switch input: 0 V and Vehicle speed: 40 km/h (24.8 MPH) or more. Common causes include Faulty Clutch Pedal Position Switch, Clutch Pedal Position Switch harness is open or shorted, Clutch Pedal Position Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B261F indicates ASCD Cancel/Clutch Switch.
Common causes: Common causes include Faulty Clutch Pedal Position Switch, Clutch Pedal Position Switch harness is open or shorted, Clutch Pedal Position Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,178

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 08, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B261F Description

OBDII Code B261F - ASCD Cancel/Clutch Switch - AutoCodes.com — B261F Code - ASCD Cancel/Clutch Switch

What does this mean?

What are the Possible Causes of the DTC B261F?

Faulty Clutch Pedal Position Switch
Clutch Pedal Position Switch harness is open or shorted
Clutch Pedal Position Switch circuit poor electrical connection
Faulty Combination Meter
Faulty Body Control Module (BCM)

How to Fix the DTC B261F?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B261F code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B261F code?

Need more information on how to fix the B261F code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B261F code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B261F Infiniti — ASCD Cancel/Clutch Switch
B261F Nissan — ASCD Cancel/Clutch Switch

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B261F Code

1. What are the common symptoms of OBDII code B261F (ASCD Cancel/Clutch Switch)?

- Common symptoms include the cruise control system not functioning properly, the inability to engage or disengage cruise control, or the cruise control setting turning off unexpectedly.

2. What are the possible causes of OBDII code B261F?

- The code B261F can be triggered by a faulty ASCD (Automatic Speed Control Device) cancel switch, a malfunctioning clutch switch, damaged wiring in the cruise control system, or a problem with the ASCD control unit.

3. How can I diagnose the cause of OBDII code B261F?

- A thorough diagnosis involves checking the ASCD cancel switch, clutch switch, wiring connections, and the ASCD control unit for any signs of damage or malfunction using a diagnostic scanner and a multimeter.

4. Can I still drive my vehicle with OBDII code B261F present?

- It is generally safe to drive the vehicle with the B261F code, but it is recommended to address the issue promptly to ensure the proper functioning of the cruise control system.

5. How can I repair OBDII code B261F?

- Repairing the B261F code may involve replacing the faulty ASCD cancel switch, repairing or replacing the clutch switch, repairing damaged wiring, or addressing any issues with the ASCD control unit.

6. Is it possible to reset OBDII code B261F without repairs?

- While clearing the code with a diagnostic scanner may temporarily turn off the check engine light, it is essential to diagnose and fix the underlying issue causing the B261F code for a lasting solution.

7. What are some DIY tips for troubleshooting OBDII code B261F?

- DIY troubleshooting tips include checking the cancel switch and clutch switch for proper operation, inspecting the wiring for any visible damage, and ensuring all cruise control components are securely connected.

8. Can a faulty ASCD cancel switch cause other issues in the vehicle?

- Yes, a faulty ASCD cancel switch can not only trigger the B261F code but also affect the proper functioning of the cruise control system, leading to potential safety concerns and inconvenience.

9. How long does it typically take to repair OBDII code B261F?

- The repair time for OBDII code B261F can vary depending on the exact cause of the issue and the complexity of accessing and replacing the faulty components. It may range from a quick fix to a more involved repair job.

10. Should I seek professional help for fixing OBDII code B261F?

- If you are not experienced in diagnosing and repairing automotive electrical systems, it is advisable to seek professional help to accurately diagnose and fix the underlying cause of the B261F code to ensure safety and reliability.