AutoCodes – Nissan – B260F Nissan

B260F Nissan Code - Interruption Of Engine Status Signal

Quick Answer

The Body Control Module (BCM) receives the engine status signal from Engine Control Module (ECM) via CAN communication. Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B260F Nissan indicates Interruption Of Engine Status Signal.
Common causes: Common causes include Faulty Engine Control Module (ECM), Engine Control Module (ECM) harness is open or shorted, Engine Control Module (ECM) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 17,032

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 07, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B260F Nissan Description

The Body Control Module (BCM) receives the engine status signal from Engine Control Module (ECM) via CAN communication. The Diagnostic Trouble Code (DTC) sets when the BCM has not yet received the engine status signal from ECM when ignition switch is in ON position

OBDII Code B260F Nissan - Interruption Of Engine Status Signal - AutoCodes.com — B260F Nissan Code - Interruption Of Engine Status Signal

What does this mean?

What are the Possible Causes of the DTC B260F Nissan?

Faulty Engine Control Module (ECM)
Engine Control Module (ECM) harness is open or shorted
Engine Control Module (ECM) circuit poor electrical connection

How to Fix the DTC B260F Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B260F Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B260F Nissan code?

Need more information on how to fix the B260F Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B260F Nissan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B260F Nissan Code

1. What are the common symptoms of OBDII code B260F in Nissan vehicles?

- Common symptoms include engine stalling, rough idling, decreased fuel efficiency, and the inability to start the engine.

2. What does the OBDII code B260F "Interruption Of Engine Status Signal" mean in Nissan cars?

- This code indicates a disruption in the communication between the engine control module (ECM) and other related modules, causing issues with engine status monitoring.

3. What are the possible causes of OBDII code B260F in a Nissan vehicle?

- Possible causes include loose or damaged wiring connections, faulty engine control module (ECM), issues with the CAN bus communication system, or a malfunctioning engine status sensor.

4. How can I diagnose the OBDII code B260F in my Nissan car?

- Diagnosing this code typically involves using a professional OBDII scanner to retrieve the specific fault codes, conducting a visual inspection of wiring connections, and performing tests on the engine status sensor and related components.

5. What are some repair tips for addressing OBDII code B260F in a Nissan vehicle?

- Repair tips may include checking and repairing any loose or damaged wiring connections, replacing a faulty engine control module (ECM), ensuring proper communication within the CAN bus system, and replacing a malfunctioning engine status sensor.

6. Can I continue driving my Nissan car with OBDII code B260F present?

- It is not recommended to continue driving the vehicle with this code active, as it can lead to further engine performance issues and potential safety hazards. It is best to address the problem promptly.

7. How much does it typically cost to repair OBDII code B260F in a Nissan vehicle?

- The cost of repair can vary depending on the specific cause of the code, but it may involve expenses for parts replacement, diagnostic labor, and potential labor costs for wiring repairs. It is advisable to consult a professional mechanic for an accurate estimate.

8. Are there any preventative measures to avoid OBDII code B260F in Nissan cars?

- Regular maintenance checks, such as inspecting wiring connections for signs of wear or damage, ensuring proper ECM function, and addressing any engine performance issues promptly, can help prevent the occurrence of this code.