AutoCodes – Chevrolet – B260E 2016 Chevrolet Silverado

B260E 2016 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit

Quick Answer

The ambient light sensor is used to monitor outside lighting conditions. Common causes include Faulty Right Daytime Running Lamps, Right Daytime Running Lamps harness is open or shorted, Right Daytime Running Lamps circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B260E 2016 Chevrolet Silverado indicates Right Daytime Running Lamps Control Circuit.
Common causes: Common causes include Faulty Right Daytime Running Lamps, Right Daytime Running Lamps harness is open or shorted, Right Daytime Running Lamps circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 148

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 29, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B260E 2016 Chevrolet Silverado Description

The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 V depending on outside lighting conditions. The Body Control Module (BCM) provides a 5 V reference signal to the ambient light sensor and the Heating, Ventilation, and Air Conditioning (HVAC) Module provides a low reference ground. The BCM monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either daytime running lamps or automatic lamp control when the headlamp switch is in the AUTO position. In daylight conditions, the BCM will command the designated daytime running lamps ON. During low light conditions, the BCM will command the low beam headlamps ON. Any function or condition that turns on the headlamps will cancel daytime running lamps operation. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a problem in the right park/daytime running lamp control circuit.

OBDII Code B260E 2016 Chevrolet Silverado - Right Daytime Running Lamps Control Circuit - AutoCodes.com — B260E 2016 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit

What does this mean?

What are the Possible Causes of the DTC B260E 2016 Chevrolet Silverado?

Faulty Right Daytime Running Lamps
Right Daytime Running Lamps harness is open or shorted
Right Daytime Running Lamps circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B260E 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B260E 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B260E 2016 Chevrolet Silverado code?

Need more information on how to fix the B260E 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B260E 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B260E 2016 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code B260E in a 2016 Chevrolet Silverado related to the Right Daytime Running Lamps Control Circuit?

Possible symptoms include the right daytime running lamp not functioning, flickering, or staying on constantly.

2. What are the possible causes of OBDII code B260E in a 2016 Chevrolet Silverado?

Potential causes include a faulty right daytime running lamp bulb, wiring issues, a defective control module, or a problem with the vehicle's body control module.

3. How can I diagnose the cause of OBDII code B260E in my 2016 Chevrolet Silverado?

Start by checking the right daytime running lamp bulb for any visible damage. Inspect the wiring for any breaks or corrosion. Use a diagnostic tool to scan the vehicle's control modules for specific fault codes related to the right DRL circuit.

4. Can I repair OBDII code B260E in my 2016 Chevrolet Silverado at home?

Depending on the cause, you may be able to repair the issue at home by replacing a faulty bulb or repairing damaged wiring. However, more complex issues may require professional diagnosis and repair.

5. Is it safe to continue driving my 2016 Chevrolet Silverado with OBDII code B260E triggered?

It is not recommended to drive with this code active, as it can affect the proper functioning of the right daytime running lamp, which is important for visibility and safety, especially during daytime driving.

6. How much does it typically cost to repair OBDII code B260E in a 2016 Chevrolet Silverado?

The cost of repair can vary depending on the specific cause of the issue. Simple fixes like replacing a bulb may be relatively inexpensive, while repairs involving control modules or wiring can be more costly.

7. Can a mechanic clear the OBDII code B260E from my 2016 Chevrolet Silverado's system after the repair?

Yes, once the underlying issue causing the code is fixed, a mechanic can use a diagnostic tool to clear the code from the vehicle's system.

8. Will OBDII code B260E in a 2016 Chevrolet Silverado cause the vehicle to fail an emissions test?

This code is related to the right daytime running lamp control circuit and should not affect emissions. However, it's still important to address and repair the issue for proper vehicle operation.

9. How long does it typically take to repair OBDII code B260E in a 2016 Chevrolet Silverado?

The repair time can vary depending on the cause of the issue and the complexity of the repair. Simple fixes may take under an hour, while more involved repairs could take several hours or more.

10. Are there any preventive measures to avoid triggering OBDII code B260E in a 2016 Chevrolet Silverado?

Regularly inspecting the condition of the vehicle's daytime running lamps and wiring can help prevent issues that may lead to this code. Additionally, addressing any lighting problems promptly can help avoid triggering the code.