AutoCodes – Chevrolet – B260E 2015 Chevrolet Silverado

B260E 2015 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit

Quick Answer

The ambient light sensor is used to monitor outside lighting conditions. Common causes include Faulty Right Daytime Running Lamps, Right Daytime Running Lamps harness is open or shorted, Right Daytime Running Lamps circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B260E 2015 Chevrolet Silverado indicates Right Daytime Running Lamps Control Circuit.
Common causes: Common causes include Faulty Right Daytime Running Lamps, Right Daytime Running Lamps harness is open or shorted, Right Daytime Running Lamps circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 155

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 29, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B260E 2015 Chevrolet Silverado Description

The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 V depending on outside lighting conditions. The Body Control Module (BCM) provides a 5 V reference signal to the ambient light sensor and the Heating, Ventilation, and Air Conditioning (HVAC) Module provides a low reference ground. The BCM monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either daytime running lamps or automatic lamp control when the headlamp switch is in the AUTO position. In daylight conditions, the BCM will command the designated daytime running lamps ON. During low light conditions, the BCM will command the low beam headlamps ON. Any function or condition that turns on the headlamps will cancel daytime running lamps operation. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a problem in the right park/daytime running lamp control circuit.

OBDII Code B260E 2015 Chevrolet Silverado - Right Daytime Running Lamps Control Circuit - AutoCodes.com — B260E 2015 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit

What does this mean?

What are the Possible Causes of the DTC B260E 2015 Chevrolet Silverado?

Faulty Right Daytime Running Lamps
Right Daytime Running Lamps harness is open or shorted
Right Daytime Running Lamps circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B260E 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B260E 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B260E 2015 Chevrolet Silverado code?

Need more information on how to fix the B260E 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B260E 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B260E 2015 Chevrolet Silverado Code

1. What are the common symptoms of OBDII code B260E in a 2015 Chevrolet Silverado related to the Right Daytime Running Lamps Control Circuit?

The common symptoms include the right daytime running lamp not functioning, flickering, or staying on constantly when the vehicle is running.

2. What could cause the OBDII code B260E to trigger in a 2015 Chevrolet Silverado?

Possible causes of the B260E code in a 2015 Chevrolet Silverado include a faulty daytime running lamp bulb, wiring issues, a defective control module, or a blown fuse.

3. How can I diagnose the Right Daytime Running Lamps Control Circuit issue in my 2015 Chevrolet Silverado?

Start by visually inspecting the right daytime running lamp for any visible damage or issues. Check the wiring harness for damage or loose connections. Use a multimeter to test the voltage at the lamp connector and the control module.

4. Is it safe to continue driving my 2015 Chevrolet Silverado with the B260E OBDII code triggered?

While the vehicle may still be operable with the code triggered, it is recommended to address the issue promptly to ensure proper functionality of the daytime running lamps for safety and legal compliance.

5. Can I repair the OBDII code B260E in my 2015 Chevrolet Silverado on my own?

Depending on your automotive repair skills, you may be able to address the B260E code yourself by replacing the faulty bulb, repairing any damaged wiring, or resetting the control module. If unsure, seek professional assistance.

6. Will resetting the OBDII code B260E in my 2015 Chevrolet Silverado resolve the issue permanently?

Resetting the code may temporarily turn off the warning light, but if the underlying issue such as a faulty component or wiring problem persists, the code is likely to reappear. It's essential to diagnose and fix the root cause.

7. How much does it typically cost to repair the Right Daytime Running Lamps Control Circuit issue in a 2015 Chevrolet Silverado?

The cost of repairing the B260E code can vary depending on the exact cause of the problem. Simple fixes like bulb replacement may be inexpensive, while issues requiring professional diagnosis and parts replacement could be more costly.

8. Are there any recalls or technical service bulletins related to the OBDII code B260E in a 2015 Chevrolet Silverado?

To determine if there are any related recalls or technical service bulletins for the B260E code in your vehicle, contact a Chevrolet dealership or check online resources provided by the manufacturer.

9. Can extreme weather conditions affect the triggering of the B260E code in a 2015 Chevrolet Silverado?

Extreme weather conditions such as heavy rain, snow, or excessive heat can potentially exacerbate existing issues with the Right Daytime Running Lamps Control Circuit, leading to the triggering of the B260E code.

10. Does the OBDII code B260E in a 2015 Chevrolet Silverado impact the overall performance of the vehicle?

While the B260E code primarily relates to the right daytime running lamp control circuit, addressing the issue promptly is important to ensure proper functioning of the lighting system and maintain optimal visibility for safe driving.