B260E 2014 Chevrolet Silverado Code - Right Daytime Running Lamps Control Circuit
Quick Answer
The ambient light sensor is used to monitor outside lighting conditions. Common causes include Faulty Right Daytime Running Lamps, Right Daytime Running Lamps harness is open or shorted, Right Daytime Running Lamps circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B260E 2014 Chevrolet Silverado indicates Right Daytime Running Lamps Control Circuit.
- Common causes
- Common causes include Faulty Right Daytime Running Lamps, Right Daytime Running Lamps harness is open or shorted, Right Daytime Running Lamps circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B260E 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC B260E 2014 Chevrolet Silverado?
- Faulty Right Daytime Running Lamps
- Right Daytime Running Lamps harness is open or shorted
- Right Daytime Running Lamps circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B260E 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B260E 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B260E 2014 Chevrolet Silverado code?
Need more information on how to fix the B260E 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B260E 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B260E 2014 Chevrolet Silverado Code
1. What does the OBDII code B260E mean for a 2014 Chevrolet Silverado?
The code B260E indicates an issue with the Right Daytime Running Lamps (DRL) Control Circuit, meaning the circuit may have a fault preventing proper operation of the right DRL.
2. What are the common symptoms of the B260E code?
Common symptoms include the right daytime running lamp not functioning, a warning light on the dashboard, or intermittent operation of the right DRL.
3. What causes the B260E code to appear?
The code can be caused by a faulty DRL bulb, damaged wiring, a bad connection, or a malfunctioning body control module (BCM).
4. How can I diagnose the B260E code in my Silverado?
Start by inspecting the right DRL bulb, checking for blown fuses, and examining the wiring and connectors for damage or corrosion. Use a scan tool to confirm the code and test the circuit.
5. Can a blown bulb cause the B260E code?
Yes, a blown or faulty right DRL bulb is a common cause of this code and should be checked first.
6. How do I fix the B260E code on my 2014 Silverado?
Replace the right DRL bulb if it’s blown, repair any damaged wiring or connectors, and clear the code using a scan tool. If the issue persists, the BCM may need further diagnosis.
7. Is the B260E code serious?
While it doesn’t affect drivability, the code can compromise visibility and safety, especially if driving in conditions requiring daytime running lights.
8. Can I reset the B260E code without fixing the problem?
You can clear the code with a scan tool, but it will likely return if the underlying issue isn’t resolved.
9. How much does it cost to fix the B260E code?
The cost depends on the cause. Replacing a bulb is inexpensive, while repairing wiring or replacing the BCM can be more costly.
10. Can a faulty BCM cause the B260E code?
Yes, if the body control module is malfunctioning, it may fail to properly control the right DRL, triggering the code.
Discuss the causes and fixes for B260E 2014 Chevrolet Silverado OBDII Code
Code B260E 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
