AutoCodes – Generic – B2600:01

B2600:01 Code - Left Daytime Running Lamps Control Circuit Short to Battery

Quick Answer

The ambient light sensor is used to monitor outside lighting conditions. Common causes include Faulty Left Headlamp Assembly, Left Headlamp Assembly harness is open or shorted, Left Headlamp Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2600:01 indicates Left Daytime Running Lamps Control Circuit Short to Battery.
Common causes: Common causes include Faulty Left Headlamp Assembly, Left Headlamp Assembly harness is open or shorted, Left Headlamp Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 251

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 26, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2600:01 Description

The ambient light sensor is used to monitor outside lighting conditions. The ambient light sensor provides a voltage signal that will vary between 0.2 and 4.9 volts depending on outside lighting conditions. The Body Control Module (BCM) provides a 5-volt reference signal to the ambient light sensor and the Heating, Ventilation, and Air Conditioning (HVAC) control module provides a low reference ground. The BCM monitors the ambient light sensor signal circuit to determine if outside lighting conditions are correct for either Daytime Running Lights (DRL) or Automatic Lamp Control (ALC) when the headlamp switch is in the AUTO position. In daylight conditions, the BCM will command the DRLs ON. During low light conditions, the BCM will command the low beam headlamps ON. Any function or condition that turns on the headlamps will cancel the DRL operation. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a short to voltage in the left DRL control circuit.

OBDII Code B2600:01 - Left Daytime Running Lamps Control Circuit Short to Battery - AutoCodes.com — B2600:01 Code - Left Daytime Running Lamps Control Circuit Short to Battery

What does this mean?

What are the Possible Causes of the DTC B2600:01?

Faulty Left Headlamp Assembly
Left Headlamp Assembly harness is open or shorted
Left Headlamp Assembly circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B2600:01?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B2600:01 Left Daytime Running Lamps Control Circuit short to Battery
B2600:02 Left Daytime Running Lamps Control Circuit Short to Ground
B2600:04 Left Daytime Running Lamps Control Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2600:01 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2600:01 code?

Need more information on how to fix the B2600:01 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2600:01 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2600:01 Code

1. What are the common symptoms of OBDII code B2600:01 (Left Daytime Running Lamps Control Circuit Short to Battery)?

The common symptoms include the left daytime running lamp staying on continuously, even when the vehicle is turned off, draining the battery.

2. What are the possible causes of the OBDII code B2600:01?

Possible causes may include a short to battery in the wiring harness connected to the left daytime running lamp, a faulty lamp control module, or a malfunctioning switch.

3. How can I diagnose the issue related to code B2600:01?

You can start by visually inspecting the wiring harness and connectors for any signs of damage or corrosion. Using a multimeter to test for continuity and voltage can help pinpoint the source of the short to battery.

4. Can I still drive my vehicle with OBDII code B2600:01?

It is not recommended to drive the vehicle with this code as the continuous illumination of the left daytime running lamp can drain the battery, potentially leaving you stranded.

5. How can I repair the Left Daytime Running Lamps Control Circuit Short to Battery issue?

Repairing the issue involves locating the short to battery in the circuit, repairing or replacing the damaged wiring or connectors, and addressing any faulty components such as the lamp control module or switch.

6. Is it possible to reset the OBDII code B2600:01 without fixing the underlying issue?

Resetting the code without addressing the root cause will only temporarily turn off the check engine light. The code will reappear once the issue persists.

7. Can extreme weather conditions cause OBDII code B2600:01 to trigger?

Yes, extreme weather conditions such as moisture or excessive heat can potentially cause electrical issues, leading to a short to battery in the left daytime running lamp circuit.

8. How long does it typically take to repair the Left Daytime Running Lamps Control Circuit Short to Battery problem?

The repair time can vary depending on the exact cause of the issue and the complexity of accessing the affected components. It may take anywhere from 1 to 4 hours to diagnose and fix the problem.

9. Are there any preventive measures to avoid OBDII code B2600:01 from occurring in the future?

Regularly inspecting the wiring harness, connectors, and components related to the daytime running lamps can help identify potential issues early and prevent the occurrence of code B2600:01.

10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code B2600:01?

Depending on the skill level and access to tools, a DIY enthusiast with basic automotive knowledge may be able to diagnose and repair the Left Daytime Running Lamps Control Circuit Short to Battery issue. However, if unsure, it is recommended to seek professional help.