B25CB Code - Driver Door Ajar Switch 1/Driver Door Ajar Switch 3 Correlation
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Driver Door Ajar Switch states do not match. Common causes include Faulty Driver Door Ajar Switch, Driver Door Ajar Switch harness is open or shorted, Driver Door Ajar Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B25CB indicates Driver Door Ajar Switch 1/Driver Door Ajar Switch 3 Correlation.
- Common causes
- Common causes include Faulty Driver Door Ajar Switch, Driver Door Ajar Switch harness is open or shorted, Driver Door Ajar Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B25CB Description
What are the Possible Causes of the DTC B25CB?
- Faulty Driver Door Ajar Switch
- Driver Door Ajar Switch harness is open or shorted
- Driver Door Ajar Switch circuit poor electrical connection
- Faulty Left Front Door Latch Assembly
- Faulty Body Control Module (BCM)
How to Fix the DTC B25CB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B25CB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B25CB code?
Need more information on how to fix the B25CB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B25CB code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B25CB Chrysler — Driver Door Ajar Switch 1/Driver Door Ajar Switch 3 Correlation
- B25CB Dodge — Driver Door Ajar Switch 1/Driver Door Ajar Switch 3 Correlation
- B25CB Jeep — Driver Door Ajar Switch 1/Driver Door Ajar Switch 3 Correlation
- B25CB RAM — Driver Door Ajar Switch 1/Driver Door Ajar Switch 3 Correlation
Frequently Asked Questions about B25CB Code
1. What does the OBDII code B25CB mean?
The code B25CB indicates a correlation issue between Driver Door Ajar Switch 1 and Driver Door Ajar Switch 3, meaning their signals are not aligning as expected.
2. What are the symptoms of code B25CB?
Symptoms may include the driver door ajar warning light staying on, interior dome lights not turning off, or issues with the alarm or keyless entry system.
3. What causes the B25CB code to appear?
Common causes include a faulty driver door ajar switch, damaged wiring or connectors, or an issue with the Body Control Module (BCM).
4. Can I drive my car with the B25CB code?
Yes, you can usually drive with this code, but it could lead to battery drain if the dome light or other systems stay active when the vehicle is off.
5. How do I diagnose the B25CB code?
Diagnose by visually inspecting the door ajar switches, wiring, and connectors for damage. Use a scan tool to monitor switch states and verify the signals from both switches.
6. How do I fix the B25CB code?
Repairs may involve replacing a faulty door ajar switch, repairing damaged wiring, or reprogramming or replacing the Body Control Module if necessary.
7. How much does it cost to fix the B25CB code?
Repair costs vary but typically range from $50 to $250, depending on whether the issue is with the switch, wiring, or BCM.
8. Can a dead battery cause the B25CB code?
A dead battery is unlikely to cause this code directly, but electrical issues related to the battery or charging system could contribute to intermittent switch signal problems.
9. How can I prevent the B25CB code from recurring?
Regularly inspect and maintain door switches and wiring, and address electrical issues promptly to prevent future problems.
10. Does the B25CB code require professional repair?
While some DIYers can handle switch replacements, diagnosing and repairing BCM or wiring issues often requires professional tools and expertise.
Discuss the causes and fixes for B25CB OBDII Code
Code B25CB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
