B25C9 Chrysler Code - Driver Door Ajar Switch 2 Stuck Closed
Quick Answer
The Diagnostic Trouble Code (DTC) sets when the Powertrain Control Module (PCM) detects a fault with the Secondary Driver Door Ajar Switch signal received over the CAN C BUS from the Body Control Module (BCM). Common causes include Faulty Driver Door Ajar Switch 2, Driver Door Ajar Switch 2 harness is open or shorted, Driver Door Ajar Switch 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B25C9 Chrysler indicates Driver Door Ajar Switch 2 Stuck Closed.
- Common causes
- Common causes include Faulty Driver Door Ajar Switch 2, Driver Door Ajar Switch 2 harness is open or shorted, Driver Door Ajar Switch 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B25C9 Chrysler Description
What are the Possible Causes of the DTC B25C9 Chrysler?
- Faulty Driver Door Ajar Switch 2
- Driver Door Ajar Switch 2 harness is open or shorted
- Driver Door Ajar Switch 2 circuit poor electrical connection
- Faulty Left Front Door Latch Assembly
- Faulty Body Control Module (BCM)
How to Fix the DTC B25C9 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B25C9 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B25C9 Chrysler code?
Need more information on how to fix the B25C9 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B25C9 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B25C9 Chrysler Code
1. What does the OBDII code B25C9 mean in a Chrysler vehicle?
The B25C9 code indicates that the Driver Door Ajar Switch 2 is stuck in the closed position, meaning it may not properly detect when the driver door is open.
2. What are the common symptoms of the B25C9 code?
Symptoms include the door-ajar warning light not illuminating, issues with interior lights not turning on when the door is opened, or problems with certain safety features like auto-lock not working.
3. What causes the B25C9 code to appear?
The code is usually caused by a faulty driver door ajar switch, damaged wiring or connectors in the door circuit, or a malfunctioning Body Control Module (BCM).
4. Can the B25C9 code affect other vehicle functions?
Yes, it can impact features like automatic locking, alarm systems, and interior lighting that rely on accurate door status detection.
5. How do I diagnose the B25C9 code?
Start by inspecting the door ajar switch and wiring for signs of damage, corrosion, or disconnections. Use a scan tool to check switch functionality and test the circuit for continuity.
6. Can I drive my Chrysler with the B25C9 code active?
Yes, you can drive the vehicle, but certain convenience and safety features may not function properly, which could reduce overall safety.
7. How do I fix the B25C9 code?
Repair or replace the driver door ajar switch if it’s faulty. Check and repair any damaged wiring or connectors, and clear the code with a diagnostic tool.
8. How much does it cost to repair the B25C9 code?
The cost depends on the exact issue. Replacing the door ajar switch typically costs $50-$150, while wiring repairs can vary depending on damage severity.
9. Can a faulty Body Control Module cause the B25C9 code?
Yes, although less common, a malfunctioning BCM can misinterpret the door ajar switch signal and trigger the code.
10. How do I prevent the B25C9 code from returning?
Regularly inspect the door ajar switch and wiring for dirt, corrosion, or wear. Address any issues promptly to avoid circuit malfunctions.
Discuss the causes and fixes for B25C9 Chrysler OBDII Code
Code B25C9 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
