B2592 Ford Code - Door Not Pulled To Primary During Power Close And High Duty Cycles
Quick Answer
While the Power Sliding Door (PSD) is closing and the PSD detent switch ground signal on the circuit is received, the PSD module supplies full power to the PSD motor to completely close and latch the power sliding door. Common causes include Power Sliding Door (PSD) Adjustment, Low Battery Voltage. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2592 Ford indicates Door Not Pulled To Primary During Power Close And High Duty Cycles.
- Common causes
- Common causes include Power Sliding Door (PSD) Adjustment, Low Battery Voltage.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2592 Ford Description
What are the Possible Causes of the DTC B2592 Ford?
- Power Sliding Door (PSD) Adjustment
- Low Battery Voltage
How to Fix the DTC B2592 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2592 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2592 Ford code?
Need more information on how to fix the B2592 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2592 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2592 Ford Code
1. What does OBDII code B2592 mean on a Ford vehicle?
B2592 indicates that the door was not pulled to the primary latch position during a power close operation, and the system detected high duty cycles.
2. What are common symptoms of code B2592?
Symptoms include the power door failing to close fully, unusual noises during operation, or the door stopping midway through the closing process.
3. What causes the B2592 code to appear?
Common causes include misaligned door latches, obstructions in the door path, a faulty power door motor, or wiring issues in the power door system.
4. Can I still drive my Ford with a B2592 code active?
Yes, the vehicle is typically still drivable, but the affected power door may not function properly or safely.
5. How can I fix a B2592 code on my Ford?
Inspect the door for obstructions, ensure the latch is aligned, check the power door motor and wiring, and replace any faulty components as needed.
6. Is a B2592 code a serious problem?
While it doesn’t affect engine performance, it can cause safety concerns if the door doesn’t close securely, so it should be addressed promptly.
7. Can a weak battery cause the B2592 code?
Yes, a weak or failing battery might not provide sufficient power for the motor, potentially triggering this code.
8. How much does it cost to repair a B2592 code?
Costs vary depending on the issue, but latch alignment or motor replacement typically ranges from $100 to $500.
9. Can I clear the B2592 code without fixing the problem?
You can clear the code with a scan tool, but it will likely return unless the underlying issue is resolved.
10. What tools are needed to diagnose a B2592 code?
You’ll need an OBDII scanner, a multimeter to check wiring, and basic tools to inspect or adjust door components.
Discuss the causes and fixes for B2592 Ford OBDII Code
Code B2592 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
