B2590 GMC Code - Left Cornering Lamp Circuit Short To Ground
Quick Answer
The cornering lamps are activated automatically at vehicle speeds below 25 MPH (40 km/h) when the turn signal/multifunction switch is placed in either the left or right turn positions and/or when the steering angle is changed from the straight-ahead position towards the side the vehicle is turning. Common causes include Faulty Left Cornering Lamp, Left Cornering Lamp harness is open or shorted, Left Cornering Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2590 GMC indicates Left Cornering Lamp Circuit Short To Ground.
- Common causes
- Common causes include Faulty Left Cornering Lamp, Left Cornering Lamp harness is open or shorted, Left Cornering Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2590 GMC Description
What are the Possible Causes of the DTC B2590 GMC?
- Faulty Left Cornering Lamp
- Left Cornering Lamp harness is open or shorted
- Left Cornering Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B2590 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2590 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2590 GMC code?
Need more information on how to fix the B2590 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2590 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2590 GMC Code
1. What are the common symptoms of OBDII code B2590 GMC (Left Cornering Lamp Circuit Short To Ground)?
The common symptoms include the left cornering lamp not functioning, the lamp flickering, or the lamp staying on constantly.
2. What are the possible causes of OBDII code B2590 GMC?
Possible causes include a short circuit in the wiring harness, a faulty left cornering lamp, a damaged lamp connector, or a malfunctioning body control module.
3. How can I diagnose the cause of OBDII code B2590 GMC?
You can start by visually inspecting the wiring harness and connector for any visible damage. Use a multimeter to check for continuity and shorts in the circuit. Test the left cornering lamp to ensure it is functioning properly.
4. What are some repair tips for fixing OBDII code B2590 GMC?
Try repairing any damaged wiring or connectors in the circuit. Replace the left cornering lamp if it is faulty. Reset the fault codes after making repairs to see if the issue is resolved.
5. Can OBDII code B2590 GMC be triggered by a loose or corroded connector?
Yes, a loose or corroded connector can cause a poor connection and lead to a short to ground in the left cornering lamp circuit, triggering OBDII code B2590 GMC.
6. Is it safe to continue driving with OBDII code B2590 GMC present?
It is not recommended to continue driving with this fault code present, as it indicates a potential issue with the left cornering lamp circuit that may affect visibility and safety.
7. How do I reset OBDII code B2590 GMC after making repairs?
You can reset the fault codes using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes. Make sure to drive the vehicle to see if the code returns.
8. Will OBDII code B2590 GMC cause my vehicle to fail an emissions test?
While this code is related to a lighting circuit and not directly tied to emissions, some states may still flag it as a potential safety concern during an emissions test.
9. Can extreme weather conditions cause OBDII code B2590 GMC to trigger?
Extreme weather conditions, such as heavy rain or snow, can potentially exacerbate existing issues in the left cornering lamp circuit and lead to the code being triggered.
10. How can I prevent OBDII code B2590 GMC from occurring in the future?
Regularly inspect and maintain the lighting system of your vehicle, including checking for any signs of damage or corrosion in the wiring and connectors. Promptly address any issues to prevent this code from occurring.
Discuss the causes and fixes for B2590 GMC OBDII Code
Code B2590 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
