B258A GMC Code - Low Beam Control Circuit
Quick Answer
With the headlamp switch in the ON position, the headlamp switch headlamp ON signal circuit is grounded through the headlamp switch. Common causes include Blown Low Beam Headlamp Fuse, Low Beam Headlamp Fuse harness is open or shorted, Low Beam Headlamp Fuse circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B258A GMC indicates Low Beam Control Circuit.
- Common causes
- Common causes include Blown Low Beam Headlamp Fuse, Low Beam Headlamp Fuse harness is open or shorted, Low Beam Headlamp Fuse circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B258A GMC Description
What are the Possible Causes of the DTC B258A GMC?
- Blown Low Beam Headlamp Fuse
- Low Beam Headlamp Fuse harness is open or shorted
- Low Beam Headlamp Fuse circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B258A GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B258A:02 Low Beam Control Circuit Short to Ground
B258A:04 Low Beam Control Circuit Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B258A GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B258A GMC code?
Need more information on how to fix the B258A GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B258A GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- B258A 2014 GMC Sierra — Low Beam Control Circuit
- B258A 2015 GMC Sierra — Low Beam Control Circuit
- B258A 2016 GMC Sierra — Low Beam Control Circuit
- B258A 2017 GMC Sierra — Low Beam Control Circuit
- B258A 2018 GMC Sierra — Low Beam Control Circuit
Frequently Asked Questions about B258A GMC Code
1. What are the common symptoms of OBDII code B258A GMC (Low Beam Control Circuit)?
- Common symptoms include low beam headlight failure, dim or flickering low beams, or complete loss of low beam function.
2. What causes the OBDII code B258A GMC to trigger?
- The code B258A is triggered when there is a malfunction in the low beam control circuit, which can be caused by issues such as a faulty headlight control module, wiring problems, or a defective light switch.
3. How can I diagnose the OBDII code B258A GMC issue?
- To diagnose the issue, you can use an OBDII scanner to read the trouble code, visually inspect the headlight components for any visible damage, and test the circuitry using a multimeter.
4. Are there any simple repair tips for fixing the OBDII code B258A GMC?
- Some simple repair tips include checking and replacing any blown fuses related to the low beam circuit, ensuring proper grounding of the headlight system, and inspecting the wiring harness for any signs of wear or corrosion.
5. Can a DIY enthusiast fix the OBDII code B258A GMC issue at home?
- Depending on their skill level, a DIY enthusiast may be able to fix the issue by following a repair manual or online guides for troubleshooting and repairing the low beam control circuit.
6. Is it safe to continue driving with the OBDII code B258A GMC triggered?
- It is not recommended to drive with the code triggered, as it can compromise visibility and safety on the road, especially at night or in low light conditions.
7. How much does it typically cost to repair the OBDII code B258A GMC at a dealership or auto repair shop?
- The cost of repairing the code B258A can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor at a dealership or auto repair shop.
8. Are there any recalls or technical service bulletins related to the OBDII code B258A GMC?
- It is recommended to check with the manufacturer or visit the National Highway Traffic Safety Administration (NHTSA) website to see if there are any recalls or technical service bulletins related to this code for your specific vehicle.
9. Can extreme weather conditions affect the triggering of the OBDII code B258A GMC?
- Extreme weather conditions such as heavy rain, snow, or extreme temperatures can potentially exacerbate existing issues with the low beam control circuit and trigger the B258A trouble code.
10. How can I prevent future occurrences of the OBDII code B258A GMC?
- To prevent future occurrences of the code, it is important to regularly inspect and maintain the headlight system, address any electrical issues promptly, and avoid overloading the low beam circuit with aftermarket accessories.
Discuss the causes and fixes for B258A GMC OBDII Code
Code B258A GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
