B2586 Ford Code - High Beams Are Inoperative
Quick Answer
The Smart Junction Box (SJB) monitors the multifunction switch positions by sending out voltage reference signals to the multifunction switch through circuits. Common causes include Faulty High Beam Relay, High Beam Relay harness is open or shorted, High Beam Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2586 Ford indicates High Beams Are Inoperative.
- Common causes
- Common causes include Faulty High Beam Relay, High Beam Relay harness is open or shorted, High Beam Relay circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2586 Ford Description
What are the Possible Causes of the DTC B2586 Ford?
- Faulty High Beam Relay
- High Beam Relay harness is open or shorted
- High Beam Relay circuit poor electrical connection
- Faulty Multifunction Switch
- Faulty Smart Junction Box (SJB)
How to Fix the DTC B2586 Ford?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2586 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2586 Ford code?
Need more information on how to fix the B2586 Ford code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2586 Ford code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B2586 Ford Code
1. What does OBDII code B2586 mean on a Ford vehicle?
Code B2586 indicates that the high beams are inoperative, typically due to an issue in the high beam circuit or a related component.
2. What are the common symptoms of code B2586?
The most common symptom is that the high beams do not turn on when activated. You may also notice a malfunction indicator or warning light on the dashboard.
3. What are the possible causes of the B2586 code?
Common causes include a faulty high beam relay, damaged wiring or connectors, a defective headlight switch, or a burned-out high beam bulb.
4. Can a blown fuse cause the B2586 code?
Yes, a blown fuse in the high beam circuit can trigger this code. Inspect the fuse box and replace any blown fuses related to the headlights.
5. How can I diagnose code B2586 on my Ford?
Start by checking the high beam bulbs, fuses, and relays. Use a multimeter to test for power at the headlight switch and inspect wiring for damage or corrosion.
6. Is it safe to drive with the B2586 code active?
While you can drive, it's unsafe to do so at night or in low-visibility conditions without functioning high beams. Address the issue promptly for safety.
7. How do I reset the B2586 code after fixing the issue?
After repairs, clear the code using an OBDII scanner. If the issue persists, the code may reappear, indicating further troubleshooting is needed.
8. Can a faulty high beam relay trigger code B2586?
Yes, a malfunctioning or stuck high beam relay can prevent the high beams from working and cause this code to be logged.
9. Could a faulty headlight switch cause code B2586?
Yes, a defective headlight switch may fail to send the proper signal to activate the high beams, leading to this code.
10. What should I do if the high beams still don't work after repairs?
Recheck all components, including the wiring and connectors. If the issue persists, consult a professional mechanic for further diagnosis.
Discuss the causes and fixes for B2586 Ford OBDII Code
Code B2586 Ford comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
