B2577 Code - Passenger Window Not Calibrated Or Lost Calibration
Quick Answer
When the Door Module has lost the parameters for window travel, this code will set. Common causes include Low Battery Voltage, Door Module not calibrated, Faulty Express Window Switch. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2577 indicates Passenger Window Not Calibrated Or Lost Calibration.
- Common causes
- Common causes include Low Battery Voltage, Door Module not calibrated, Faulty Express Window Switch.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2577 Description
What are the Possible Causes of the DTC B2577?
- Low Battery Voltage
- Door Module not calibrated
- Faulty Express Window Switch
- Express Window Switch harness is open or shorted
- Express Window Switch circuit poor electrical connection
How to Fix the DTC B2577?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2577 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2577 code?
Need more information on how to fix the B2577 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2577 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B2577 Buick — ALC Relay Control Circuit Is Open/Shorted To Ground
- B2577 Cadillac — ALC Relay Control Circuit Is Open/Shorted To Ground
- B2577 Chevrolet — ALC Relay Control Circuit Is Open/Shorted To Ground
- B2577 Chrysler — Passenger Window Not Calibrated Or Lost Calibration
- B2577 Dodge — Passenger Window Not Calibrated Or Lost Calibration
- B2577 GMC — ALC Relay Control Circuit Is Open/Shorted To Ground
- B2577 Pontiac — ALC Relay Control Circuit Is Open/Shorted To Ground
Frequently Asked Questions about B2577 Code
What does the OBDII code B2577 mean?
1. The B2577 code indicates that the passenger window is not calibrated or has lost its calibration, which can affect its automatic functions. 2.
What are common symptoms of the B2577 code?
Symptoms include the passenger window not rolling up or down smoothly, one-touch functionality not working, or the window stopping prematurely. 3.
What causes the B2577 code to appear?
The code can be triggered by a loss of power to the window motor, a faulty window motor or control module, or if the window calibration was not performed after repairs. 4.
How do I fix the B2577 code?
Perform a window calibration procedure, which typically involves rolling the window fully up and down while holding the switch for a few seconds. If the issue persists, inspect the motor or control module. 5.
Can I drive with the B2577 code active?
Yes, the vehicle is still drivable, but the passenger window may not function properly, which could be inconvenient or unsafe in certain situations. 6.
Do I need specialized tools to fix the B2577 code?
In most cases, no. The window calibration can often be done with the standard window switch. However, diagnostic tools may be needed if there’s a deeper electrical or module issue. 7.
Will disconnecting the battery clear the B2577 code?
Disconnecting the battery may temporarily reset the code, but it won’t fix the underlying issue. The window still needs to be calibrated to resolve the problem. 8.
How much does it cost to fix the B2577 code?
If it’s just a calibration issue, it may cost nothing if performed manually. However, if the motor or module needs replacement, the cost can range from $100 to $400, depending on the vehicle and parts. 9.
Can bad weather cause the B2577 code?
Yes, exposure to moisture or freezing conditions can interfere with the window motor or sensors, potentially leading to a loss of calibration. 10.
Do I need to recalibrate the passenger window after replacing the battery?
In some vehicles, yes. Replacing the battery can reset the window’s memory, requiring recalibration to restore proper function.
Discuss the causes and fixes for B2577 OBDII Code
Code B2577 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
